RMX™ 1000
Configuring Other Network Options (Optional)
If necessary, you can configure other network parameters according to the following procedure:
Click IP Network Services, then double click LAN 1 item.
1 | . |
2Click the Routers tab.
Set the IP address for the sending router of packet transmission
Set the target network address for packet transmission
Set the subnet mask for the target network
3
4If your IP network type is SIP only, go to step 8.
5To register the system to the gatekeeper, click the Gatekeeper tab.
|
| Choose an IP network type for the |
|
| RMX 1000 system to make a call |
|
| Check the option to register to GK |
|
| and set the following parameters |
|
| Set the Primary / Alternate |
|
| Gatekeeper parameters. |
|
| Primary/Alternate Gatekeeper filed |
|
| indicates whether or not the device |
|
| is registered successfully |
|
| Set the E.164 prefix / H.323 alias |
6 |
| for the system |
7If your IP network type is H.323 only, go to step 10.
8To configure the SIP server, click the SIP Server tab.
Set the transport layer protocol used for communicating with the SIP server.
Check the option to register to SIP
Server
Set the Primary/Alternate SIP server parameters. Primary /Alternate Server filed indicates whether or not the device is registered successfully.
Enter the user name and password provided by the SIP server.
Optional: Set the IP address and
9port number for the outbound proxy server.
10Click OK.
The system is now ready for use. For additional configuration instructions, please refer to the Polycom RMX 1000 System User Guide.
Starting a Conference via Remote Control
The RMX 1000 conference platform offers several ways to start a conference. Participants can dial into a meeting room configured by the administrator or create their own conference ID
H.323 Participants
H.323 participants dial:
<RMX 1000 Prefix in Gatekeeper><Conference ID>[##Conference Password][##Chairperson Password]
Here, the character in [ ] is optional.
For example, if RMX 1000 prefix in gatekeeper is 925, to create a conference which ID is 1001, dial 9251001. At the meantime if want to set a conference password 1111 and a chairperson password 2222, dial 9251001##1111##2222
SIP Participants
SIP participants dial:
<Conference ID>[$$Conference Password][$$Chairperson Password]@<RMX 1000 Static Route Domain Name>
Here, the character in [ ] is optional.
For example, if RMX 1000 static route domain name is polycom.com, to create a conference which ID is 1001, dial 1001@ polycom.com. At the meantime if want to set a conference password 1111 and a chairperson password 2222, dial 1001$$1111$$2222@polycom.com
Connecting to a Conference via Remote Control
A user can directly dial in to the ongoing conference or meeting room using the remote control. In this way, the user must obtain the conference ID and password (if the conference password or chairperson password is set) first.
H.323 Participants
H.323 participants dial:
<RMX 1000 Prefix in Gatekeeper><Conference ID>[##Conference Password or Chairperson Password].
Here, the character in [ ] is optional. For example:
RMX 1000 prefix in gatekeeper: 925
ID of the conference to be dialed in: 1001 Then, the endpoint dials 9251001
If the conference to be dialed in is set with the conference password 1111 and chairperson password 2222
Then, the regular participant dials 9251001##1111 The conference chairperson dials 9251001##2222
SIP Participants
SIP participants dial:
<Conference ID> [$$Conference Password or Chairperson Password]<@RMX 1000 Static Route Domain Name>
Here, the character in [ ] is optional. For example:
RMX 1000 static route domain name: polycom.com
ID of the conference to be dialed in: 1001 Then, the endpoint dials 1001@ polycom.com
If the conference to be dialed in is set with the conference password 1111 and chairperson password 2222
Then, the regular user dials 1001$$1111@ polycom.com
The conference chairperson dials 1001$$2222@ polycom.com.
