Polycom IP 300 manual No Audio on Headset, No Response from Feature Key Presses

Models: IP 300

1 30
Download 30 pages 2.83 Kb
Page 24
Image 24

No Audio on Headset

Verify correct connections:

Ensure the headset is plugged into the jack marked Headset at the rear of the phone.

Ensure the headset amplifier (if present) is turned on and/or the volume is correctly adjusted.

Ensure the headset amplifier (if present) is turned on and/or the volume is correctly adjusted.

No Response from Feature Key Presses

Verify phone is in active state:

Make a call to the phone to check for inbound call display and ring- ing as normal. If successful, try to press feature keys within the call to access Directory or Buddy Status for example.

• Press Menu followed by Status and Lines to confirm line is actively registered to the server.

Reboot the phone to attempt re- registration to the server.

Display shows “Network Link is Down”

Verify LAN cable is properly connected:

Check termination at the switch or hub (furthest end of the cable from the phone).

Check that the switch or hub is operational (flashing link/status lights) or contact your system administrator.

• Press Menu followed by Status and Network. Scroll down to verify LAN port is Active.

Reboot the phone to attempt re- registration with the server.

21

Page 24
Image 24
Polycom IP 300 manual No Audio on Headset, No Response from Feature Key Presses, Display shows Network Link is Down