Polycom IP 500/501 SIP 1.6 manual Installing SoundPoint IP 500/501 SIP, AC Power Option

Installing SoundPoint® IP 500/501 SIP

This section provides basic installation instructions and information for obtaining the best performance with the Sound- Point® IP 500/501 SIP phone. If you re- quire additional information or assistance with your new phone, please contact your system administrator.

The SoundPoint® IP 500/501 SIP User Guide includes regulatory compliance information that your system administra- tor should review and can also be found at http://www.polycom.com.

Connecting Network and Power Source

AC Power Option

Connect the keyed end of the sup- plied Network Cable to the LAN jack on the phone, and connect the shorter end to the Network (LAN) port. Connect the DC plug of the AC wall adapter into the supplied LAN cable as shown.

Power over Ethernet (PoE) Option

Using an Inline Power Cable (optional acces- sory from Polycom), the phone can be alter- nately powered from a Power over Ethernet (PoE) compliant switch or hub. Inline Power Cables exist for both IEEE 802.3af and Cisco pre-standard PoE options. Simply plug the keyed end of the Inline Power Cable into the LAN jack on the phone and the other end to an available port on the Power over Ethernet switch or hub.

LAN PC HEADSET HANDSET

LAN PC HEADSET HANDSET

Cisco™Catalyst™ In-Line

Power Switch

IEEE 802.3af compliant

In-Line Power switch

Cisco™ In-Line Power Cable

(Part No. 2200-11014-002 Rev A)

OR

IEEE 802.3af In-Line

Power Cable

(Part No. 2200-11077-002 Rev A)

2