Polycom manual Using SoundPoint IP 600 SIP, Placing a Call

Using SoundPoint® IP 600 SIP

Placing a Call

Using the Handset:

1. To obtain dial tone, pick up the handset.

2. Dial the desired number.	During a call, users can alternate
OR	between handset, headset, or
	handsfree modes by pressing the
Dial by SIP URL/IP address†:
	or	keys.
• After obtaining dial tone, press Name
• Enter URL or IP (press * for “.” and #
for “@”)
• Press Send to complete the call.

Using Handsfree Speakerphone Mode:

1.With the handset on-hook, press any assigned line key, , or NewCall to obtain dial tone.

2.Dial the desired number.

OR

Dial by SIP URL or IP address† as above.

Using the Headset:
1. With the optional headset connected, press
any assigned line key,	, or NewCall to
		See also Headset Memory Mode.
obtain dial tone.

2.Dial the desired number.

OR

Dial by SIP URL or IP address† as above.

Users also have the option to dial directly from the dial pad without first getting dialtone. Simply enter the number then lift the handset or press the

Dial soft key or press the or keys.

In all cases, the active call will appear on the dis- play showing call duration and destination.

†Examples: 10.3.0.42	To obtain the IP address of your telephone,
joe@205.173.1.24	press Menu followed by System Status and
sip: jane@polycom.com	General. The IP address is listed together
	with other network information.

6