Polycom IP 600 SIP 1.6.X Installing SoundPoint IP 600 SIP, Connecting Network and Power Source

Installing SoundPoint® IP 600 SIP

This section provides basic installation instructions and information for obtaining the best performance with the Sound- Point® IP 600 SIP phone. If you require additional information or assistance with your new phone, please contact your sys- tem administrator.

The SoundPoint® IP 600 SIP User Guide includes regulatory compliance informa- tion that your system administrator should review and can also be found at www. polycom.com.

Connecting Network and Power Source

AC Power Option

Connect the supplied Network cable be- tween the LAN jack on the phone and the LAN port on the wall or hub/switch device port. Connect the DC plug on the AC wall adapter to the DC jack marked on the phone.

In-Line Power Option

If the phone is connected to a compatible Ethernet switch that can provide in-line power, the phone will use that power op- tion. Simply plug the supplied Network cable between the LAN jack on the phone and an available Power and Data port on the In-Line Power switch.

Cisco™ Catalyst™ In-Line

Power Switch

(Optional)

IEEE 802.3af compliant

In-Line Power switch

2