Chapter 1- Hardware Description
Component Replacement
The RMX 2000 is designed with ease of maintenance in mind. Most components are swappable and are accessible directly via the front panel or the rear panel.
The following components can be replaced when they are faulty:
•CPU (CNTL) Module
•Multi Processor Module (MPM) Board(s) - This board is Hotswap enabled
•Power Supply Module
•Fan Drawer
•RTM IP Board
Warning!
•All maintenance tasks are to be performed by qualified, authorized personnel.
•Use only replacement parts supplied by your dealer.
•Follow all procedures. Do not skip any steps.
Before replacing parts:
•To ensure a part needs replacing, complete the troubleshooting procedures.
•Identify exactly which part needs replacing.
•Make sure you have the correct replacement part on hand.
•Make sure you are using proper ESD equipment, to prevent damage to the system.
Hot Swappable MPM Boards
All MPM Boards can be installed or removed while the RMX 2000 is powered on and operating.
The RTM IP and RTM ISDN Card are not Hotswappable. System shutdown is required when replacing the ISDN or IP RTM card.
