Polycom RMX 2000 Hardware Guide
Replacing a Functional MPM Module
The MPM module is Hot Swappable and the power on the RMX can stay ON. For more information see - Use the following procedure to replace a faulty MPM Module types F or H:
1Unscrew the captive screws on the front panel of the RMX that secure the MPM Module.
2Use the metal ejector levers to pull the MPM Module out of its slot in the Backplane.
3Carefully slide the MPM Module out through the front panel.
4Slide in the replacement MPM Module.
5Push the MPM Module firmly into the Backplane, making sure it is properly seated in its slot.
6Ensure that the metal ejector levers are fully retracted into their housings.
7Tighten the captive screws on the front panel of the RMX that secure the MPM Module.
8Restart the RMX2000.
