| RSS2000 Policies and Limitations |
|
|
Subject | Description |
H.323 Alias length | The maximum length of the system H.323 alias name is 16 characters |
Console Service | RS232 configuration: Baud rate 9600, Data bits 8, Parity None, Stop bits |
| 1, Flow control OFF. |
| ONLY ONE connection to the Console service is allowed, either by |
| RS232 or by Telnet, but not both. |
Endpoint menu | 1. When schedule a dial out & record from the Web UI, RSS will |
| loopback the video and NEVER show the menu unless a menu |
| operation (FECC arrow keys or DTMF 2/4/6/8) is given from the |
| endpoint. |
| 2. When a |
| the "immediate recording" option, RSS will do the same as above. |
| 3. When inviting an endpoint to a P2P recording room (using E.164 |
| number of the P2P room followed by #/* and E.164 number of the |
| invited endpoint ), the inviting endpoint will have the menu and the |
| invited endpoint won’t have the menu |
| 4. When two endpoints meet at a P2P recording room, only one of them |
| can have the menu at a time. |
P2P recording | Maximum bandwidth for a P2P recording room is 1024K. If video protocol |
maximum bandwidth | for P2P recording room is H.264, then the maximum bandwidth is 768K |
Archive file size | If the media file size exceeds 4GB, downloading it from Web UI may be |
| incomplete. |
Media Player | Windows Media Player 9/10 is required. WMP 10 is recommended. |
Support | RealPlayer can also be used if WMP is properly installed. |
| QuickTime player is not supported. |
| Some third party media player such as Media Player Classic (MPC) and |
| VLC can also be used, but they were not certify |
Archive playback | Archive playback with WMP does not support playback controls: |
| Pause/Resume/FF/Backward, etc |
H.323 playback | During H.323 playback, if there is packet loss and endpoint requests I- |
| Frame, RSS cannot apply the request. Since all audio/video data are from |
| the media file. |
System Reset | Hard reset (power off and on) is not recommended. |
| Reset should be done via the Web UI or Console service whenever |
| possible. |
LDAP integration | Microsoft Active Directory only |
H.323 preview | 1. Only two H323 devices can receive Preview |
| are 2 endpoints previewing on RSS2000 , the third one connect to |
| RSS2000 will not receive preview , if these two endpoints receiving |
| preview stop to preview or disconnect ,the third one still cannot |
| receive , it need to |
| 2. HD or SD archives cannot be previewed. |
| 3. No Transcoding for Preview – Meaning archive recorded in H263 |
| will not be able to be preview by an endpoint connected in H264 and |
| vice versa, however – endpoint support H264 and H263 – in case the |
| archive is in H263 – the playback will work well. |
| 4, In a clustered configuration, H.323 endpoint cannot receive a |
| preview image of the archive that is not stored on the RSS unit that |
| the endpoint is connected. This description should be added to the |
| note her |
Archive Converter | When using the RSS2000ArchiveConverter – the transcoded file loaded |
| back to the RSS will be limited to 20 FPS |
|
|
DOC2207A RSS 2000 V3.0 Getting Started guide - Release Note - Final - February 26, 2008.doc
