Developer’s Guide SoundPoint IP / SoundStation IP
Image Tags
The following image tag is supported:
•<img>—Defines an image
Note | The Microbrowser supports images stored in uncompressed .bmp format. While all |
| BMP bit depths will be displayed to the best of the phone’s ability, it is |
| recommended that the image format most suitable for the target platform be |
| chosen. For example, the SoundPoint IP 601 LCD supports four levels of grey, so a |
| |
| Images can be scrolled up and down, however images that are too wide will be |
| truncated. |
|
|
| Various platforms have differing limits due to memory. There are also |
| differing pixel limits for devices of differing pixel depth. A 1 bit per pixel |
| image 160x80 requires only 1600 bytes. For a 24 bit picture, the memory |
| requirement is 38400 bytes. |
| There are several limits depending on the source data (this involves the cache |
| limits in configuration) and the display converted data, which is dependant on |
| available RAM (and is limited in the code depending on platform). |
| <img> |
| The img element defines an image. |
Note |
|
The "align", "border", "hspace", and "vspace" attributes of the image element are | |
| not supported in XHTML 1.0 Strict DTD. |
|
|
The following attributes are supported:
Attribute | Value/s | Description |
|
|
|
src | URL | The URL of the image to display |
| (Ex: |
|
| “http://www.topxml.com/images/to |
|
| pxml_site.gif” |
|
| or ”c:\images\img1.jpg” ) |
|
|
|
|
height | Pixels (number, EX: “30” ) | Specifies the height of the image |
| % | in pixel or percent. |
|
|
|
width | Pixels (number, EX: “30” ) | Specifies the width of the image in |
| % | pixel or percent. |
|
| |
|
|
|
2 - 6
