9. Analog connections

Where PBXs or incoming lines are analog rather than PRI or BRI, Voice over IP can still be used. Care must be taken however, because unlike the symmetrical operation of digital interfaces – where any information provided by one digital telephony device to the other digital telephony device can also be passed in the opposite direction, analog signalling is not symmetric. The two different ends of an analog line are called FXS and FXO. There are therefore two different types of analog VoIP gateway interface, FXS and FXO. The choice of FXS or FXO interface will depend on both what the gateway needs to connect to and also the functionality that it needs to support.

FXS: An analog PSTN line and an analog extension interface to a PBX are both FXS interfaces – analog telephones may be directly into FXS interfaces.

•It supplies a DC voltage to the line (around 48v).

•It alerts the attached device that there is a call available by supplying ‘ringing voltage’ on the line. It does not provide any information about the number that was dialled to make this line ring.

•Caller ID may be provided3; this is typically provided by an FSK (modem) tone burst between first and second rings.

•Typically it cannot indicate that the call has cleared, though there are extensions to the analog signalling specification (loop current disconnect / battery stop & line current reversal / battery reversal) that do allow a physical indication of call cleardown.

•The FXS interface detects that a new call is being sent to it by detecting that a current, ‘line-current’ is flowing. This line current is triggered by the far end device going ‘off-hook’.

•FXS devices detect DTMF (Dual Tone Multi Frequency) tones which are used for dialling telephone numbers.

•FXS devices typically detect hook-flash (also known as recall); hook-flash is used by PBXs and other telephony systems to alert them and trigger them to move into a command mode (e.g. to initiate call transfer or conferencing when in the middle of a call).

•FXS devices detect the end of the call by loss of ‘line-current’ when the far end device goes ‘on-hook’.

FXO: An analog telephone (which can plug into a PSTN line or plug into an analog extension interface of a PBX) is an FXO device.

•It may use the line voltage supplied by the FXS line to power low current circuitry

•It detects that an incoming call is being presented to it by receiving ‘ringing voltage’ – it does not receive any indication of the number that was dialled for the call to reach here.

•Caller ID may be received4; this is typically provided by an FSK (modem) tone burst between first and second rings.

•If the FXS device supports loop current disconnect / battery stop or line current reversal / battery reversal signalling, the Vega 50 FXO can be configured to detect call cleardown at the end of the call – otherwise the call must be cleared from the VoIP side. (N.B. this means that FXO to FXO calls – even across a VoIP link are not appropriate if neither cleardown method is supported at either end).

•To initiate a call the FXO device goes ‘off-hook’ – actually it completes a circuit allowing current to flow between the FXS and FXO.

•To dial a telephone number the FXO device uses DTMF tones.

3Vega 50 FXS supports Belcore sdmf and mdf standards, SPA-1001, SPA-2000, SPA-3000 support these and many others

4Vega 50 FXO supports Belcore sdmf and mdf standards, SPA-2000 support these and many others

Version 2.1

16 March 2006

Page 22 of 33

Vega Gateway Scenarios.

©2005-2006 VegaStream Ltd.

 

Examples are given in best faith – ensure that you check the capabilities of systems before

 

 

deploying them, especially the functionality of devices not designed and delivered by VegaStream.

 

VoIPon Solutions www.voipon.co.uk sales@voipon.co.uk Tel: +44 (0) 1245 600560

Page 21 Page 23
Page 22
Image 22
Polycom Vega Gateway appendix Analog connections
Page 21 Page 23

Vega Gateway specifications

Polycom Vega Gateway serves as a crucial component in modern telecommunications, bridging the gap between traditional telephony systems and Voice over IP (VoIP) networks. As organizations transition to digital communication solutions, the Vega Gateway plays a vital role in ensuring compatibility and enhancing connectivity.

One of the primary features of the Polycom Vega Gateway is its ability to facilitate seamless interoperability between different communication protocols. It supports a range of signaling protocols, including SIP (Session Initiation Protocol), H.323, and analog interfaces, making it easy to connect legacy phone systems to modern VoIP setups. This flexibility allows businesses to gradually upgrade their telecommunications infrastructure without the need for costly complete system overhauls.

The Vega Gateway is equipped with advanced transcoding capabilities, which enable the conversion of audio streams between various formats. This is especially beneficial in multi-vendor environments where different systems may use incompatible codecs. Its ability to transcode ensures high-quality voice communication regardless of the underlying technology, thus maintaining clarity and reducing latency.

In terms of deployment, the Polycom Vega Gateway can be implemented as both a hardware appliance and a virtualized solution, providing businesses with deployment flexibility based on their IT environment. This adaptability is crucial for organizations looking to optimize their resources and scale their telephony solutions as needed.

Security is another key characteristic of the Vega Gateway. It incorporates robust encryption protocols, such as SRTP (Secure Real-time Transport Protocol), to safeguard voice communications against potential threats. Additionally, the gateway features firewall traversal capabilities, making it suitable for deployment in various network environments without compromising on security.

The gateway is also designed with ease of management in mind. Administrators can configure and monitor the device through a web-based interface or command line, ensuring that managing the system remains straightforward even for complex setups. Logging and reporting functionalities further enhance administrative oversight, allowing organizations to analyze their VoIP usage and optimize resource allocation.

Overall, the Polycom Vega Gateway is a comprehensive solution that addresses the complexities of integrating modern VoIP technology with legacy systems. With its robust feature set, diverse technological support, and commitment to security and manageability, the Vega Gateway stands out as an essential tool for organizations looking to enhance their communication strategies in an ever-evolving digital landscape.
Top Page Image Contents