Telephony Network

E1 Euro ISDN signalling is supported by Vega 400 and Vega 100

T1 NI1 & NI2 signalling is supported by Vega 400 and Vega 100

T1 Loop start, Ground start and Wink start CAS signalling is supported by Vega 400 and Vega 100

BRI Euro ISDN signalling is supported by Vega 50 BRI

Analog connection is possible, but is not preferred (for details on analog connectivity see later section)

IP Network

Recommend – private IP network between sites

Can be any reliable IP connection, including leased line, line of site laser / wireless connection and satellite

QOS should be implemented to ensure that VoIP packets pass through the network in a consistent and timely manner and are not discarded by congested routers

Consider VPN between sites as this:

-removes any issues with firewalls / NAT

-encrypts audio and management data

The Internet can be used, but contention and available bandwidth must be considered

User experience

By grooming the traffic on the PSTN side of the PBX all user PBX functions will continue to operate. This system will operate in exactly the same way as the phone system worked before the gateways were installed, for example, even existing shortcode dialling will continue to work (as the PBX will expand this to a full number before presenting it to the PSTN).

USPs

Vega dial planner capability provides powerful routing decision making. For example, calls can be routed based on dialled number prefixes, full numbers, and even on who is making the call.

Considerations

Check the numbers that are presented to the PSTN consider for example:

-does the PBX present both National format and local format numbers to the PBX?

-does the PBX insert any “carrier select prefix” to the dialled number?

-can “block caller ID” or other prefixes be used in dialled numbers?

Emergency calls should be routed directly to the PSTN, not over the VoIP link

Program in fixed number length dial plans where possible to avoid the DTMF timeout delays incurred when routing calls to variable length numbers

Call transfer from PBX to PBX will only work if call transfer PBX to PBX worked across the PSTN (the PBX may block this).

If extension number dialling of the far end PBX is to be used (rather than just grooming off the full dialled destination number), remember the extension number will have to be prefixed with the PBX’s ‘connect to PSTN’ digit; usually 9 in UK, but can be 0 in Europe.

If IP connectivity fails, calls can be programmed to be routed over the PSTN instead; there may, however, be a bit of delay in deciding that the IP connection is down.

Version 2.1

16 March 2006

Page 3 of 33

Vega Gateway Scenarios.

©2005-2006 VegaStream Ltd.

 

Examples are given in best faith – ensure that you check the capabilities of systems before

 

 

deploying them, especially the functionality of devices not designed and delivered by VegaStream.

 

VoIPon Solutions www.voipon.co.uk sales@voipon.co.uk Tel: +44 (0) 1245 600560

Page 3
Image 3
Polycom Vega Gateway appendix Telephony Network, IP Network, User experience, USPs, Considerations

Vega Gateway specifications

Polycom Vega Gateway serves as a crucial component in modern telecommunications, bridging the gap between traditional telephony systems and Voice over IP (VoIP) networks. As organizations transition to digital communication solutions, the Vega Gateway plays a vital role in ensuring compatibility and enhancing connectivity.

One of the primary features of the Polycom Vega Gateway is its ability to facilitate seamless interoperability between different communication protocols. It supports a range of signaling protocols, including SIP (Session Initiation Protocol), H.323, and analog interfaces, making it easy to connect legacy phone systems to modern VoIP setups. This flexibility allows businesses to gradually upgrade their telecommunications infrastructure without the need for costly complete system overhauls.

The Vega Gateway is equipped with advanced transcoding capabilities, which enable the conversion of audio streams between various formats. This is especially beneficial in multi-vendor environments where different systems may use incompatible codecs. Its ability to transcode ensures high-quality voice communication regardless of the underlying technology, thus maintaining clarity and reducing latency.

In terms of deployment, the Polycom Vega Gateway can be implemented as both a hardware appliance and a virtualized solution, providing businesses with deployment flexibility based on their IT environment. This adaptability is crucial for organizations looking to optimize their resources and scale their telephony solutions as needed.

Security is another key characteristic of the Vega Gateway. It incorporates robust encryption protocols, such as SRTP (Secure Real-time Transport Protocol), to safeguard voice communications against potential threats. Additionally, the gateway features firewall traversal capabilities, making it suitable for deployment in various network environments without compromising on security.

The gateway is also designed with ease of management in mind. Administrators can configure and monitor the device through a web-based interface or command line, ensuring that managing the system remains straightforward even for complex setups. Logging and reporting functionalities further enhance administrative oversight, allowing organizations to analyze their VoIP usage and optimize resource allocation.

Overall, the Polycom Vega Gateway is a comprehensive solution that addresses the complexities of integrating modern VoIP technology with legacy systems. With its robust feature set, diverse technological support, and commitment to security and manageability, the Vega Gateway stands out as an essential tool for organizations looking to enhance their communication strategies in an ever-evolving digital landscape.