ADDITIONAL SPECIFIC SAFETY RULES
1.Hold power tools by insulated gripping surfaces when performing an operation where the cutting tool may contact hidden wiring or its own cord. Contact with a "live" wire will make exposed metal parts of the tool "live" and shock the operator.
2.Verify the direction of rotation before starting the tool. Never attempt to change direction of rotation while switch is “ON”. To do so, may damage interlock feature built into switch. Be sure switch is “OFF” and motor has completely stopped before changing direction of rotation.
3.Wear eye and hearing protection. Always use safety glasses. Everyday eyeglasses are NOT safety glasses. USE CERTIFIED SAFETY EQUIPMENT. Eye protection equipment should comply with ANSI Z87.1 standards. Hearing equipment should comply with ANSI S3.19 standards.
4.
Use of this tool can generate and disburse dust or other airborne particles, including wood dust, crystalline silica dust and asbestos dust. Direct particles away from face and body. Always operate tool in well ventilated area and provide for proper dust removal. Use dust collection system wherever possible. Exposure to the dust may cause serious and permanent respiratory or other injury, including silicosis (a serious lung disease), cancer, and death. Avoid breathing the dust, and avoid prolonged contact with dust. Allowing dust to get into your mouth or eyes, or lay on your skin may promote absorption of harmful material. Always use properly fitting NIOSH/OSHA approved respiratory protection appropriate for the dust exposure, and wash exposed areas with soap and water.
SAVE THESE INSTRUCTIONS!
SYMBOL | DEFINITION |
V | volts |
A | amperes |
Hz | hertz |
W | watts |
kW | kilowatts |
F | farads |
µF | microfarads |
l | litres |
g | grams |
kg | kilograms |
bar | bars |
Pa | pascals |
h | hours |
min | minutes |
s | seconds |
n0 | |
…/min or | Revolutions or reciprocations per minute |
or d.c | direct current |
or a.c | alternating current |
6
