Porter-Cable 7765 instruction manual Replacement Parts, Motor

2.Wear ear protectors when using the tool for extended periods. Prolonged exposure to high intensity noise can cause hearing loss.

3.There are certain applications for which this tool was designed. Porter-Cable strongly recommends that this tool NOT be modified and/or used for any application other than for which it was designed. If you have any questions relative to its application DO NOT use the tool until you have written Porter-Cable and we have advised you.

			Technical Service Manager
			Porter-Cable Corporation
			4825 Highway 45 North
SYMBOL			Jackson, TN 38305
			DEFINITION
	V		volts
	A		amperes
	Hz		hertz
	W		watts
	kW		kilowatts
	µF		microfarads
	l		liters
	kg		kilograms
	N/cm2		newtons per square centimeter
	Pa		pascals
	h		hours
	min		minutes
	s		seconds
		..........................	alternating current
3		..........................	three-phase alternating current
3N			three-phase alternating current with neutral
______			direct current
– – – –
	n0		no load
		..........................	alternating or direct current
			Class II Construction
		..........................
		..........................	splash-proof construction
		..........................	watertight construction
	…/min		revolutions or reciprocation per minute

REPLACEMENT PARTS

When servicing use only identical replacement parts.

MOTOR

Many Porter-Cable tools will operate on either D.C., or single phase 25 to 60 cycle A.C. current and voltage within plus or minus 5 percent of that shown on the specification plate on the tool. Several models, however, are designed for A.C. current only. Refer to the specification plate on your tool for proper voltage and current rating.

4