Porter-Cable A07513-0412-0 How To Clean The Water Inlet Filter, How To Remove The Wheels

HOW TO CLEAN THE WATER INLET FILTER

This screen filter should be checked periodically and cleaned if necessary.

1.	Remove filter by	Filter Screen
	grasping end and
	removing it from
	water inlet of pump
	as shown.
2.	Clean filter by flushing it with
	water on both sides.
3.	Re-insert filter into water inlet
	of pump. NOTE: Cone side faces
	out.

NOTE: Do not operate pressure washer without filter properly installed.

HOW TO REMOVE THE WHEELS

1.Using a 1/8" hex head wrench loosen set screw in hub collar.

2.Slide hub collar from axle and remove the tire.

13- ENG A07513