ADDITIONAL SPECIFIC SAFETY RULES
1.ALWAYS disconnect the sander from the power source before changing abrasive sheets.
2.USE PROPER SAFETY EQUIPMENT. Wear safety goggles to protect your eyes and wear a protective mask to minimize breathing in the fine dust created while sanding. NOTE: Some wood contains preservatives which can be toxic. Take extra care to prevent inhalation and skin contact when work- ing with these materials.
3.SANDING OF LEAD
4.Some wood contains preservatives which can be toxic. Take extra care to prevent inhalation and skin contact when working with these materi- als. Request, and follow, any safety information available from your material supplier.
There are certain applications for which this tool was designed. Delta strongly recommends that this tool NOT be modified and/or used for any application other than for which it was designed. If you have any questions relative to its application DO NOT use the tool until you have written Delta and we have advised you.
Technical Service Manager Delta Machinery
4825 Highway 45 North Jackson, TN 38305
| SYMBOLS |
SYMBOL | DEFINITION |
V | volts |
A | amperes |
Hz | hertz |
W | watts |
kW | kilowatts |
µF | microfarads |
l | liters |
kg | kilograms |
N/cm2 | newtons per square centimeter |
Pa | pascals |
h | hours |
min | minutes |
s | seconds |
........................ | alternating current |
3 | |
3N | |
........................ | direct current |
n0 | no load |
........................ | alternating or direct current |
...................... | Class II Construction |
4
