TO START THE ENGINE

Never run engine indoors or in enclosed, poor ventilated areas, engine exhaust contains carbon monoxide, an

odorless and deadly gas.

1.Open the fuel shut-off valve on tank and engine.

2.Move the choke control located on the engine to "CHOKE" position.

NOTE: No choke is required on warm engines. Make sure choke is in the "RUN" position on warm engine starts.

4.Move the ON/OFF switch on engine to the ON position.

5.Grasp handle on rope starter and pull slowly until resistance

is felt. Let the rope rewind slowly. Pull rope with a rapid full arm stroke. Let rope rewind slowly. Repeat if necessary.

NOTE: IF ENGINE OIL LEVEL IS TOO LOW, ENGINE WILL NOT START. CHECK OIL LEVEL AND ADD IF NECESSARY.

6.When engine starts, gradually move the choke to the "RUN" position.

IMPORTANT: Allow generator to run at no load for 5 minutes upon each initial start-up to allow engine and generator to stabilize.

13- ENG

D27243

Page 12 Page 14
Page 13
Image 13
Porter-Cable D27243-028-0 instruction manual To Start the Engine
Page 12 Page 14

D27243-028-0 specifications

The Porter-Cable D27243-028-0 is a powerful and versatile tool designed for professional woodworkers and DIY enthusiasts alike. This exceptional tool combines advanced technologies, exceptional ergonomics, and powerful performance to help users achieve precise results with ease.

One of the standout features of the D27243-028-0 is its robust motor. Equipped with a high-performance motor, this tool delivers a consistent and reliable output, allowing craftsmen to tackle even the most demanding projects without breaking a sweat. This motor provides adequate power, making it suitable for various applications, including shaping, smoothing, and trimming.

The D27243-028-0 also boasts a variable speed control feature, enabling users to adjust the tool's speed to match the specific requirements of different tasks. This level of control is crucial for achieving precision in woodworking, as different materials and cutting techniques may require varying speeds for optimal results. The variable speed range ensures that users can seamlessly transition between different tasks while maintaining accuracy.

Additionally, comfort during operation is paramount, and the Porter-Cable D27243-028-0 excels in this aspect. The tool features an ergonomic design, complete with comfortable grips that minimize hand fatigue during prolonged use. This thoughtful design consideration allows users to work longer while reducing the risk of strain or discomfort.

The D27243-028-0 also supports efficient dust management, an essential feature in any woodworking application. The integrated dust collection system helps keep the workspace clean by capturing sawdust and debris as users work. This not only boosts visibility but also enhances safety, as a clean workspace reduces the chances of slips and accidents.

Durability is another hallmark of the Porter-Cable D27243-028-0. Built with high-quality materials, this tool is designed to withstand the rigors of professional use. Its rugged construction ensures longevity, providing users with a solid investment that will serve them well over time.

Overall, the Porter-Cable D27243-028-0 stands as a testament to the brand's commitment to delivering top-notch tools that blend power, precision, and comfort. Whether you're a seasoned professional or a passionate hobbyist, this tool equips you with the capability to bring your woodworking projects to life with accuracy and ease.
Top Page Image Contents