903090 -
Fig. 10
19.FIRE FASTENERS INTO WORK SURFACE ONLY, never into materials too hard to penetrate. Fig. 11.
20.GRIP TOOL FIRMLY TO MAINTAIN CONTROL WHILE allowing tool to recoil away from work surface as fastener is driven. If safety element is allowed to recontact work surface before trigger is released an unwanted fastener will be fired.
21.DO NOT DRIVE FASTENERS on top of other fasteners, or with the tool at too steep an angle: the fasteners can ricochet causing personal injury. Fig. 12.
22.DO NOT DRIVE FASTENERS CLOSE to the edge of the workpiece. The workpiece is likely to split allowing the fastener to fly free or ricochet causing personal injury. Fig.
23.KEEP HANDS AND BODY PARTS away from area shown in Fig. 13A, to avoid injury.
24.DO NOT USE ON SCAFFOLDINGS OR LADDERS or for tasks in which changing location involves the use of scaffoldings, stairs, ladders, and the like. Do not use for specific tasks such as closing boxes or crates or fitting transportation safety systems on vehicles and wagons. Fig. 13B.
Fig. 11
Fig. 12
Fig. 13A
Fig. 13B
TECHNICAL SPECIFICATIONS
Noise level | Typical Mean |
A - Weighted sound impulse . . | effective Acceleration . . .3.91 m/s2 |
power level . . . . . 95.1 dBA |
|
P - Emission sound pressure |
|
pressure level . . . 86.3 dBA |
|
|
|
| 5 |
