EMPLOYER’S RESPONSIBILITIES

Employer must enforce compliance with the safety warnings and all other instructions contained in this manual.

Keep this manual available for use by all people assigned to use this tool.

For personal safety and proper operation of this tool, read and understand tool labels and manual. Failure to follow warnings could result in DEATH or SERIOUS INJURY. Read and follow all of these instructions carefully.

FUNCTIONAL DESCRIPTION

Porter-Cable Model DA250B is a heavy duty pneumatic finish nailer. It is designed to install 15 ga. finish nails of various lengths from 11/4" to 21/2" long.

Use approved Porter-Cable fasteners only.

POWER SOURCE

This tool is designed to operate on clean, dry, compressed air at regulated pressures between 70 and 120 PSI (Pounds per Square Inch)(4.8 to 8.3 BAR). The preferred system would include a filter, a pressure regulator, and an automatic oiler located as close to the tool as possible, within 15 ft/4.6 m is ideal.

All compressed air contains moisture and other contaminates that are detrimental to internal components of the tool. An air line filter will remove most of these contaminates and significantly prolong the life of the tool. If an in-line oiler is not available: place five or six drops of Porter-Cable Air Tool Oil into the tool’s air inlet at the beginning of each workday.

The tool is equipped with a 1/4" male “quick connector”. A 3/8" male “quick connector” is available from Porter-Cable and may be used in situations where a 1/4" supply line is not available. The tool must always be connected to the air supply with a coupling such that all pressure is removed from the tool when the coupling is disconnected.

PREPARING THE TOOL

1.After reading and understanding this entire manual, connect tool to air supply (Fig. 18).

2.Orient a strip of approved fasteners with points down (A) Fig. 19, align,and insert into the magazine “T” slot points first.

Do not load fastener strip into magazine backwards.

A

Fig. 18

Fig. 19

7

Page 6 Page 8
Page 7
Image 7
Porter-Cable DA250B EMPLOYER’S Responsibilities, Functional Description, Power Source, Preparing the Tool
Page 6 Page 8

DA250B specifications

The Porter-Cable DA250B is a well-regarded tool in the world of pneumatic nailers, designed for those seeking efficiency, precision, and durability in their projects. This particular model is an 18-gauge brad nailer that excels in a variety of applications, such as trim work, cabinetry, and light woodworking. Its lightweight design and user-friendly features make it a popular choice among both professional contractors and DIY enthusiasts.

One of the standout characteristics of the DA250B is its powerful motor that drives nails from 5/8 inch to 2 inches in length. This range allows users to tackle a wide array of tasks, from affixing delicate trim to securing more substantial materials. The tool’s capacity to shoot brads at a rapid rate significantly enhances productivity, allowing projects to move forward without unnecessary delays.

The DA250B is equipped with a tool-free depth-of-drive adjustment feature, allowing users to easily adjust the depth of the nail without the use of additional tools. This ensures consistent results and minimizes the risk of over-driving or under-driving nails, both of which can compromise the aesthetic and structural integrity of finished work.

Another impressive feature is its integrated rear exhaust that effectively directs air away from the user and work surface, helping to keep both clean during operation. This design consideration is particularly important in a working environment where visibility and cleanliness are paramount.

The nailer also boasts a lightweight construction, weighing in at just over 3 pounds, which reduces user fatigue. The ergonomic grip and balanced design further enhance the comfort of the user during extended periods of work. Its robust aluminum housing adds to its durability, ensuring that the tool can withstand the rigors of frequent use on job sites.

Additionally, the DA250B incorporates a no-mar tip to prevent damage to the work surface, making it ideal for projects requiring a high level of finish quality. The magazine is easy to load, accommodating up to 100 brads, reducing downtime for reloading.

In conclusion, the Porter-Cable DA250B is a versatile, efficient, and durable brad nailer that offers an array of features designed to maximize productivity and ease of use. Its combination of power, precision, and user-friendly characteristics makes it a reliable choice for both professionals and hobbyists alike, ensuring that any project can be completed with confidence and finesse.
Top Page Image Contents