English
Connection to an Amplifier
You can only listen to DVD playback using COAXIAL
(X)and AUDIO OUT (A2) connections. The VCR will still be heard through the DVD/VCR AUDIO OUT (A1) jack.
Connecting to an amplifier equipped with two channel analog stereo or Dolby Pro Logic II/Pro Logic
Connect the Left and Right AUDIO OUT (or DVD/VCR AUDIO OUT) jacks on the unit to the audio left and right in jacks on your amplifier, receiver, or stereo system using the audio cables (A1, A2) supplied.
Connecting to an amplifier equipped with two chan- nel digital stereo (PCM) or to an Audio/Video receiv- er equipped with a
1.Connect one of the unit’s DIGITAL AUDIO OUT jacks (COAXIAL X) to the corresponding jack on your amplifier. Use an optional digital (COAXIAL X) audio cable.
2.You will need to activate the unit’s digital output. (See “AUDIO” on page 17).
Digital Multi-channel sound
A digital
Notes:
•If the audio format of the digital output does not match the capabilities of your receiver, the receiv- er will produce a strong, distorted sound or no sound at all.
•Six Channel Digital Surround Sound via digital connection can only be obtained if your receiver is equipped with a Digital
•To see the audio format of the current DVD in the
Rear of DVD+VCR
A1 | A2 | X |
L | R | COAXIAL |
|
| |
AUDIO INPUT | DIGITAL INPUT | |
Amplifier (Receiver)
Manufactured under license from Dolby Laboratories. “Dolby”, “Pro Logic”, and the
Accessory Audio/Video (A/V) Connections to unit
Connect the VCR IN LINE 1 or LINE 2 jacks on the unit to the audio/video out jacks on your accessory component, using the optional audio/video cables. (Refer to page 22 for “Recording from External Components”.)
12
