Initial Settings - VCR
By using the VCR Setup menu, you can make various adjustments to items such as clock setting, and timer recordings.
Your unit allows remote control adjustment of several features.
General Operation
1.Press VCR on the Remote Control.
2.Press SETUP/MENU and the MAIN menu will appear.
3.Use v/V to select the desired menu, then press OK.
4.Use v/V to choose a desired option on the select- ed Menu. Then use b/B to choose a desired setting.
5.Press SETUP/MENU to exit menu.
Note:
Menus remain
CLOCK
Use v/V/b/B to enter the necessary information.
•MONTH : Choose the month.
•DAY : Choose the date.
The day of the week will display automatically.
•YEAR : Choose the year.
•TIME : Choose the time.
Press and hold b/B to advance clock continuously.
Note:
The clock uses the
PROGRAM
1.Press SETUP/MENU and the main menu appears.
2.Use v / V to choose the PROGRAM option and press OK.
If eight programs are already entered, the FULLY PROGRAMMED message appears for a moment and then PROGRAM 1 appears on the TV screen.
3.Use the v / V buttons to switch between the program options, and the b / B buttons to input the program information:
Input the MONTH, DAY, START and STOP times of the program you want to record.
INPUT: Select a LINE1 or LINE2.
SPEED: AUTO mode determines how much tape is left and switches the speed from SP to SLP, and vice versa. If it is necessary to complete recording the program.
If this occurs there could be some picture and sound distortion at the point where the speed changes.
REPEAT: To record up to 8 programs on a certain day of every week select WEEKLY. To record up to 8 programs at the same time Monday through Friday select DAILY. Otherwise select ONCE.
4.Press SETUP/MENU and the program is memo- rized by the unit.
5.Additional programs may be entered by repeating steps
Notes:
•Ensure you insert a tape with the record safety tab intact before the first programmed time.
•Press x (STOP) to end timer recording.
Preparation
13
