English
Connections
Tips
●Depending on your TV and other equipment you wish to connect, there are various ways you could connect the unit.
●Please refer to the manuals of your TV, Stereo System or other devices as necessary to make the best connections.
●For better sound reproduction, connect this unit’s AUDIO OUT jacks to the audio in jacks of your amplifier, receiver, stereo or audio/video equipment. See “Connecting to optional equipment” on page 11.
Caution
–Make sure this unit is connected directly to the TV. Set the TV to the correct video input channel.
–Do not connect this unit’s AUDIO OUT jack to the phono in jack (record deck) of your audio system.
Connecting to a TV & Decoder
●Make one of the following connections, depending on the capabilities of your existing equipment.
Basic connection (AV)
1 Connect the EURO AV1 AUDIO/VIDEO on the rear panel of this unit to the SCART input socket on the TV using a SCART lead.
2 Some TV broadcasters transmit encoded television signals which you can only see with a purchased or rented decoder.You can connect such a decoder (descrambler) to the DVD+VCR.
Basic connection (RF)
1 Connect the RF antenna cable from your indoor/ outdoor antenna to AERIAL jack on the rear panel of this unit.
2
DVD exclusive out connection
●Component Video (Color Stream®) connection
1 Connect the COMPONENT/PROGRESSIVE SCAN VIDEO OUT jacks on the DVD Player to the corresponding in jacks on the TV using the Y Pb Pr cable.
2 Connect the Left and Right AUDIO OUT jacks of the DVD Player to the audio left/right in jacks on the TV using the audio cables.
Progressive Scan (ColorStream®Pro) connection
●If your television is a
●If your TV does not accept the Progressive Scan format, the picture will appear scrambled if you try Progressive Scan on the DVD Player.
1 Connect the COMPONENT/ PROGRESSIVE SCAN VIDEO OUT jacks on the DVD Player to the corresponding in jacks on the TV using the Y Pb Pr cable.
2 Connect the Left and Right AUDIO OUT jacks of the DVD Player to the audio left/right in jacks on the TV using the audio cables.
Notes
–Set the Progressive to “On” on the setup menu for progressive signal, see page 18.
–Progressive scan does not work with the analog video connections (yellow VIDEO OUT jack).
Rear of this unit (DVD exclusive out connection)
Rear of TV
AERIAL | VIDEO | COMPONENT VIDEO INPUT/ | AUDIO INPUT | SCART INPUT | |||
| INPUT |
| PROGRESSIVE SCAN | ||||
|
| Pr | Pb | Y | L | R |
|
Decoder
Rear of this unit (Basic connection)
10
