90550130 PC1800HD hammer drill 4/3/09 2:40 PM Page 9
Installing and Removing the Battery Pack From the Tool
: Make certain the
TO INSTALL BATTERY PACK: Insert battery pack into tool as shown in figure C.
C
TO REMOVE BATTERY PACK: Depress the battery release button as shown in figure D and pull battery pack out of tool.
D
SAFETY WARNINGS AND INSTRUCTIONS: DRILLS
1.Hold drill firmly with one hand on the grip and the other hand on the side handle as shown in figure E.
2.When attaching accessories in the drill chuck, hand tighten the keyless chuck firmly.
: Drill may stall (if overloaded or improperly used) causing a twist. Always expect the stall. Grip the drill firmly to control the twisting action and prevent loss of control which could cause personal injury. If a stall does occur, release the trigger immediately and determine the reason for the stall before
E
9
