90550119 PC1800JS Jig Saw 4/9/09 7:52 AM Page 11

SWITCHING ON AND OFF

-To switch the tool on, depress the lock-off button (2) then press the variable speed switch (1). The tool speed depends on how far you depress the switch.

-To switch the tool off, release the variable speed switch.

ORBITAL ACTION SELECTOR (FIGURE G)

-For fast, rough straight cuts in wood, set the orbital action selector (7) to the symbol (II).

-For fast, smooth straight cuts in wood, set the orbital action selector (7) to the symbol (I).

-For accurate, straight and curve cutting and a smooth surface finish, set the orbital action selector

(7) to the symbol (0).

-NOTE: Orbital action is not recommended when curve cutting or for use in metals.

CONNECTING A VACUUM CLEANER TO THE TOOL (FIGURE H)

-Align the dust extraction adaptor (8) with the saw shoe as shown.

-Insert the ribs (9) into the slots (10).

-Rotate the adaptor until it locks into position. Make sure that the ribs (9) are correctly seated.

-Connect the vacuum cleaner hose (not supplied) to the adaptor.

Dust extraction is not possible when making bevel cuts.

Hints for optimum use

G

H

POCKET CUTTING

A pocket cut is an easy method of making an inside cut. The saw can be inserted directly into a panel or board without first drilling a lead or pilot hole. In pocket cutting, measure the surface to be cut and mark clearly with a pencil. Next tip the saw forward until the front end of the shoe sits firmly on the work surface and the blade clears the work through its full stroke. Switch the tool on and allow it to attain maximum speed. Grip the saw firmly and lower the back edge of tool slowly until the blade reaches its complete depth. Hold the shoe flat against the wood and begin cutting. Do not remove blade from cut while it is still moving. Blade must come to a complete stop.

FLUSH CUTTING

A flush cut is necessary when finishing off cuts up to a wall or an obstacle, such as back- splash. One of the easiest ways to accomplish the flush cut is to use a flush cutting blade. The flush cutting blade provides the reach necessary to cut right up to the front edge of the jig saw shoe. Return the shoe to the 0° positive stop position before installing and using the flush cutting blade. For the best cut quality the flush cutting blade should be used in the 0 or I orbital position. The flush cutting blade should not be used to start the cut because the flush cutting blade prevents the shoe from being supported by the work surface. Use wood cutting practices explained below.

WOOD CUTTING

Support the workpiece adequately at all times. Use a higher speed for cutting wood. Do not attempt to turn the tool on when blade is against material to be cut. This could stall the motor. Place the front of shoe on the material to be cut and hold the jig saw shoe firmly against the wood while cutting. Don’t force the tool; let the blade cut at its own speed. When the cut is complete, turn the jig saw off. Let blade come to a complete stop and then lay the saw aside before loosening the work.

11

Page 10 Page 12
Page 11
Image 11
Porter-Cable 90550119 Switching on and OFF, Orbital Action Selector Figure G, Pocket Cutting, Flush Cutting, Wood Cutting
Page 10 Page 12

PC1800JS, 90550119 specifications

The Porter-Cable 90550119 PC1800JS is an exceptional jig saw that stands out in the power tool market. Known for its user-friendly design and robust performance, this tool is ideal for both professional craftsmen and DIY enthusiasts. It delivers a combination of precision, power, and versatility that makes it indispensable for a variety of cutting tasks.

One of the main features of the PC1800JS is its powerful 6.5-amp motor, which provides ample power for tackling tough materials. This motor is designed to maintain consistent speed under heavy load, ensuring smooth cuts every time. The jig saw operates with a variable speed control feature that allows users to adjust the speed from 0 to 3,000 strokes per minute. This versatility makes it suitable for a wide range of materials, including wood, metal, and plastic.

The jig saw is equipped with an orbital action feature that offers four settings, allowing users to customize the cutting action based on their specific needs. This feature enhances cutting efficiency and provides smoother finishes on different materials. The adjustable shoe of the PC1800JS enables users to make bevel cuts up to 45 degrees, making it a valuable tool for projects requiring angled cuts.

In terms of design, the PC1800JS is ergonomically shaped for maximum comfort during extended use. The rubber over-mold handle provides a secure grip, reducing user fatigue for prolonged operations. The tool also includes an integrated dust blower that keeps the cutting line clear of debris, improving visibility and accuracy during cuts.

Another standout characteristic of the Porter-Cable PC1800JS is its tool-less blade change system. This feature allows for quick and easy blade changes, enabling users to switch between various blade types without the need for additional tools. The jig saw is compatible with both T-shank and U-shank blades, providing users with ample options to tackle different projects.

In summary, the Porter-Cable 90550119 PC1800JS jig saw combines powerful performance with innovative features and ease of use. With its adjustable speed settings, orbital action, and comfortable design, it is well-equipped to handle a variety of cutting tasks, making it a valuable addition to any toolkit. Whether for professional use or home improvement projects, the PC1800JS stands as a reliable choice for achieving precise and clean cuts every time.
Top Page Image Contents