MAINTENANCE
When performing maintenance, you
may be exposed to hot surfaces, water pressure, or moving parts that can cause serious injury or death!
Before performing any maintenance or repair, disconnect spark plug wire, let engine cool and release all water pressure. The engine contains flammable fuel. DO NOT smoke or work near open flames while performing maintenance.
To ensure efficient operation and longer life of your pressure washer, a routine maintenance schedule should be prepared and followed. If the pressure washer is used in unusual conditions, such as high- temperatures or dusty conditions, more frequent maintenance checks will be required.
ENGINE
Consult the Engine Owners Manual for the manufacturer's recommendations for any and all maintenance. NOTE: The frame is equipped with an oil drain hole to help make changing the engine oil easier.
PUMP
NOTE: The pump was filled with oil at the factory.
1.Change pump oil after the first ten
(10)hours of operation and every fifty (50) hours thereafter.
To Check Oil:
1.The oil level should come to the red dot in the middle of the sight glass.
Oil fill Plug
|
| Sight |
|
|
|
| Glass | Oil Drain Plug | |
|
|
| ||
|
|
| ||
How To Change Pump Oil | ||||
1. | Loosen oil fill plug. | |||
2. | Place a container under the oil | |||
| drain plug. |
|
| |
3.Remove oil drain plug.
4.After oil is drained replace oil drain plug. Tighten securely.
5.Remove oil fill plug and fill to the red dot in the middle of the sight glass with 30W non detergent oil.
6.Replace oil fill plug and tighten securely.
A07708 | 12- ENG |
