2. The charger and battery pack may become warm to touch while charging. This is a

normal condition, and does not indicate a problem. To facilitate the cooling of the

battery pack after use, avoid placing the charger or battery pack in a warm environment

such as in a metal shed, or an uninsulated trailer.

 

3. If the battery pack does not charge properly:

 

a. Check current at receptacle by plugging in a lamp or other appliance

b. Check to see if receptacle is connected to a light switch which turns power off

when you turn out the lights.

 

c. Move charger and battery pack to a location where the surrounding air

temperature is approximately 65°F - 75°F (18°- 24°C).

 

d. If charging problems persist, take the tool, battery pack and charger to your

local service center.

 

4. The battery pack should be recharged when it fails to produce sufficient power on

jobs which were easily done previously. DO NOT CONTINUE to use under these

conditions. Follow the charging procedure. You may also charge a partially used pack

whenever you desire with no adverse affect on the battery pack.

5. Foreign materials of a conductive nature such as, but not limited to, steel wool,

aluminum foil, or any buildup of metallic particles should be kept away from charger

cavities. Always unplug the charger from the power supply when there is no battery

pack in the cavity. Unplug charger before attempting to clean.

 

6. Do not freeze or immerse charger in water or any other liquid.

WARNING: Shock hazard. Do not allow any liquid to get inside charger.Never

attempt to open the battery pack for any reason. If the plastic housing of the battery pack

breaks or cracks, return to a service center for recycling.

 

WARNING: Safety W rnings and Instructions: Drills

1. Hold drill firmly with one hand on the grip and the other hand on the bottom of the

tool.

 

2. When attaching accessories in the drill chuck, hand tightenthe keyless chuck firmly.

WARNING: Drill may stall (if overloaded or improperly used) causing a twist. Always

expect the stall. Grip the drill firmly to control the twisting action and prevent loss of

control which could cause personal injury. If a stall does occur, release the trigger

immediately and determine the reason for the stall before re-starting.

INSTALLING AND REMOVING THE BATTERY PACK FROM THE TOOL

WARNING: Make certain the lock-off button is engaged to prevent switch actuation

before removing or installing battery.

C

TO INSTALL BATTERY PACK: Insert battery pack into tool,

 

until an audible click is heard as shown in figure C.

 

TO REMOVE BATTERY PACK: Depress the battery release

D

buttons as shown in figure D and pull battery pack out of

tool.

 

8

8

Page 7 Page 9
Page 8
Image 8
Porter-Cable PCL120DD Breaks or cracks, return to a service center for recycling, Before removing or installing battery
Page 7 Page 9

PCL120DD specifications

The Porter-Cable PCL120DD is a versatile and powerful cordless drill driver engineered for both DIY enthusiasts and professionals. This tool stands out for its combination of performance, durability, and ease of use. With a lightweight design and ergonomic grip, the PCL120DD is perfect for extended use without causing excessive hand fatigue.

One of the standout features of the PCL120DD is its compact and lightweight design, weighing just under 3.5 pounds. This makes it easy to maneuver, especially in tight spaces where other drills may struggle. The tool is equipped with a high-performance 20V MAX lithium-ion battery which provides longer runtime and less downtime during projects. This battery technology ensures that users can work longer without the need for frequent recharging.

The PCL120DD features a two-speed transmission, which allows users to switch between speeds of 0-350 RPM for low-speed applications and 0-1,500 RPM for high-speed drilling and driving tasks. This versatility makes it suitable for a variety of tasks, from assembling furniture to tackling heavier-duty jobs around the home or job site.

Another notable aspect of the PCL120DD is its 1/2-inch keyless chuck that allows for quick and easy bit changes without the need for additional tools. This feature is particularly beneficial for users who frequently swap out bits during their projects, ensuring that they can maintain productivity without interruption.

In addition to its performance capabilities, the Porter-Cable PCL120DD incorporates a built-in LED light that illuminates the work area for improved visibility in low-light conditions. This feature enhances safety and accuracy, enabling users to work efficiently without straining their eyes.

Furthermore, the PCL120DD’s robust construction ensures resilience against wear and tear, making it a reliable choice for a variety of applications. The tool is designed to withstand the rigors of professional use while remaining accessible for home projects.

Overall, the Porter-Cable PCL120DD is an impressive drill driver that combines innovative technology, user-friendly features, and solid construction. Whether you are a seasoned contractor or a novice DIYer, this tool offers the performance and functionality needed to tackle any drilling or driving tasks with confidence and efficiency.
Top Page Image Contents