POSIFLEX Business Machines KP-300T Installation Guide, Unpacking Contents, Mechanical Fixation

INSTALLATION GUIDE

UNPACKING CONTENTS

Items packed in for	Qt’y
The side mount programmable keypad itself	1
Posiflex product information CD	1
Transparent key caps for single key	20
Key clip	1
Control keys (4 pcs / set)	1
Legend sheets (4 sh. / set)	1
This manual	1

Note: Utility drivers for KP-300 / KP-300T can be found in the CD or DVD packaged or please find for latest updates by visiting driver download page of our web site:http://www.posiflex.com.tw/DriversDownload.asp

MECHANICAL FIXATION

For the KP-300 / KP-300T to be

installed in the KS series host system, the upgrade kit is installed to the right edge of the LCD panel. You may find two screw holes on back of the right side of the main

unit of KS series as circled in the right picture. Remove these 2 screws to remove

the cover for side mount upgrade kit as arrowed in same picture. Take out the cable inside this cover as circled in lower right picture and then connect it to connector inside the side mount upgrade kit KP-

300 / KP-300T as arrowed in same picture.

Gently arrange the excessive length of this cable back in the

hole and use the 2 original screws to fit KP-300 / KP-300T

back to the position originally occupied by the cover as in the left picture. Please reserve the cover if there is chance to have the side mount kit removed in the future.

KEYTOP LAYOUT

Keytop Replacement

The keypad in KP-300 / KP-300T is organized into 2 parts: a 4 by 4 numerical keypad area and a 4 by 6 matrix minus a 2 by 2 square recess programmable keypad area. However, this keypad allows some layout

Part 3