alterations by the system integrator. Besides the standard single key installed, there are double keys and blank keys for purchase to provide more convenient user interface.
When replacement of keytop is required, it is advisable to use a flattop (minus sign) screw driver (Do not use the attached key clip for this operation.) to help getting the key top off gently. Please always first orientate the key tops as below before inserting any keytop into the case of the keypad.
Failure to do so could result in permanent damage not covered in product warranty. Please always match the latching tab on bottom stem of keytop with the tab in guiding hole and gently press the key top down till a click sound is heard as indicated in the pictures below.
Single key top | Double key top |
Tab in the guide hole
Latching tab
Labeling On Keytop
The programmable keypad is provided with an easy and durable method for reminding the user of content programmed in each programmable key. First preprint (or write) in each cell of the attached colored legend sheet the “name” for each key. Stick each cell to the corresponding keytop and then put on the transparent key cap from the accessories. In this way, the labeling will be protected and resistant to scratch or rubbing.
When
KEYPAD PROGRAMMING
The programming of the keys above the numerical keypad in
/
Utility Installation
In the Posiflex Product Information CD attached with
In the above mentioned subfolder please find a further subfolder “uKBW_xxx” with “xxx” representing any number of the utility revision. This
Part 4
