![ANNEX: WALL MOUNT APPLICATION](/images/new-backgrounds/140113/1401139x1.webp)
ANNEX: WALL MOUNT APPLICATION
The wall mount option kit contains 2 pcs of plastic cotters, 2 pcs of marked as dashed crosses in the template that is 5.3” or 135 mm wide (center to center). Hole diameter should be 1/4” or 6.35 mm each. Hole depth should be at least 1 and 3/8” or 35 mm.
Please then insert one plastic cotter into each hole leaving the flat end with hole of the plastic cotter at the outside opening of the hole. Use a hammer to tap the plastic cotter in gently if necessary. Please then screw the bracket into the plastic cotters with the guide grooves on top
side.
Now please check the bottom of
switch side of the bottom as in the left drawing. Slide the
installed.
Please then do the connection to power adaptor and other required cables for operation.
Guide Grooves ![Manual background](/images/new-backgrounds/140113/1401139xi4.webp)
ANNEX