|
| US LF | <1F><0A> | Move Cursor Up | ||
|
| US CR | <1F><0D> | Move Cursor To Right Most Position | ||
|
|
|
|
|
| Move Cursor To Specified Position |
|
| US $ | <1F><24><n><m> | n = 1 ~ 20 | ||
|
|
|
|
|
| m = 1, 2 |
|
| US @ | <1F><40> |
| Show Version | |
|
| US B | <1F><42> |
| Move Cursor To Bottom Position | |
|
| US C | <1F><43><n> | Cursor On / Off, n = 1, 0 | ||
|
| US E | <1F><45><n> | Blink Display Screen | ||
|
| n = 0 ~ 255 | ||||
|
|
|
|
|
| |
|
| PST COMMAND | MODE: |
| ||
|
| HEX CODE |
| FUNCTION | ||
| <01> |
|
| Set Pass Through Flag (should not be used) | ||
|
| <06> <N1> <N2> |
| Change Leading Code | ||
| <14> <01> |
| Wraparound Mode (Default) | |||
| <14> <02> |
| Vertical Scroll Mode | |||
| <14> <03> |
| Insert Mode | |||
| <14> <04> |
| Overwrite Mode (Default) | |||
| <14> <08> |
| Back Space | |||
| <14> <09> |
| Move Cursor Right | |||
|
| <14> <0A> |
| Move Cursor Down | ||
|
| <14> <0B> |
| Move Cursor Left | ||
|
| <14> <0C> |
| Delete Character | ||
|
| <14> <0D> |
| Move Cursor To Left Most Position | ||
|
| <14> <0E> |
| Clear Display | ||
| <14> <10> |
| Clear Line 1 | |||
| <14> <11> |
| Clear Line 2 | |||
| <14> <12> |
| Cursor Block Mode | |||
| <14> <13> |
| Cursor Under Line Mode | |||
| <14> <15> <02> |
| Clear Pass Through Flag | |||
| <14> <16> |
| Switch To Epson Mode | |||
| <14> <17> |
| Cursor On | |||
| <14> <18> |
| Cursor Off | |||
| <14> <19> |
| Reset |
| ||
|
| <14> <1A> <P> |
| Move Cursor To Position P (P=0~13,14~27h) | ||
|
| <14> <1B> |
| Move Cursor To Rightmost Position Of Line 1 | ||
|
| <14> <1C> |
| Move Cursor To Rightmost Position Of Line 2 | ||
The power on default of the PD302 itself is the Epson command mode. The Euro Dollar Sign is designated at code <D5>h.
Part 7
