CUSTOMER RESPONSIBILITIES

V-BELTS

Check V-belts for deterioration and wear after 100 hours of operation and replace if necessary. The belts are not adjustable. Replace belts if they begin to slip from wear.

TRANSAXLE COOLING

The fan and cooling fins of transmission should be kept clean to assure proper cooling.

Do not attempt to clean fan or transmission while engine is running or while the transmission is hot.

•Inspect cooling fan to be sure fan blades are intact and clean.

•Inspect cooling fins for dirt, grass clippings and other materials. To prevent damage to seals, do not use compressed air or high pressure sprayer to clean cooling fins.

TRANSAXLE PUMP FLUID

The transaxle was sealed at the factory and fluid maintenance is not required for the life of the transaxle. Should the transaxle ever leak or require servic- ing, contact your nearest authorized service center/department.

ENGINE

LUBRICATION

Only use high quality detergent oil rated with API service classification SF, SG, or SH. Select the oil’s SAE viscosity grade according to your expected operating temperature.

SAE VISCOSITY GRADES

 

 

 

 

 

 

 

 

 

 

 

SAE 30

 

 

 

 

 

 

 

5W-30

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

¡F

-20¡

0¡

 

 

30¡ 32¡ 40¡

 

 

60¡

80¡

 

100¡

¡C

-30¡

-20¡

-10¡

0¡

10¡

20¡

30¡

40¡

TEMPERATURE RANGE ANTICIPATED BEFORE NEXT OIL CHANGE

NOTE: Although multi-viscosity oils (5W30, 10W30 etc.) improve start- ing in cold weather, these multi-viscosity oils will result in increased oil consumption when used above 32°F. Check your engine oil level more frequently to avoid possible engine damage from running low on oil.

Change the oil after every 50 hours of operation or at least once a year if the tractor is not used for 50 hours in one year.

Check the crankcase oil level before starting the engine and after each eight (8) hours of operation. Tighten oil fill cap/dipstick securely each time you check the oil level.

TO CHANGE ENGINE OIL (See Fig. 13)

Determine temperature range expected before oil change. All oil must meet API service classification SF, SG or SH.

•Be sure tractor is on level surface.

•Oil will drain more freely when warm.

•Catch oil in a suitable container.

•Remove oil fill cap/dipstick. Be careful not to allow dirt to enter the engine when changing oil.

•Remove drain plug.

•After oil has drained completely, replace oil drain plug and tighten se- curely.

•Refill engine with oil through oil fill dipstick tube. Pour slowly. Do not overfill. For approximate capacity see “PRODUCT SPECIFICATIONS” on page 3 of this manual.

•Use gauge on oil fill cap/dipstick for checking level. Be sure dipstick cap is tightened securely for accurate reading. Keep oil at “FULL” line on dip- stick.

OIL FILL

CAP¦DIPSTSICK

OIL DRAIN

PLUG

FIG. 13

17

Page 16 Page 18
Page 17
Image 17
Poulan 161608 owner manual Engine, Belts, Transaxle Cooling, Transaxle Pump Fluid, Lubrication
Page 16 Page 18

161608 specifications

The Poulan 161608 chainsaw is a robust tool designed for homeowners and professionals alike, offering a blend of power, efficiency, and user-friendly features. This chainsaw is part of Poulan’s line of reliable outdoor power equipment, making it an excellent choice for tackling various cutting tasks, from trimming branches to felling small trees.

One of the main features of the Poulan 161608 is its powerful engine. It is equipped with a 38cc 2-stroke gas engine, which provides ample power for demanding cutting applications. The engine is designed for durability and reliability, ensuring that users can rely on the chainsaw for a range of tasks without frequent breakdowns. Additionally, the engine is engineered for easy starting, thanks to the incorporation of a primer bulb and an adjustable choke system. This allows users to start the chainsaw effortlessly, even in colder weather conditions.

The Poulan 161608 also boasts a 16-inch bar and chain, providing a balance between maneuverability and cutting capacity. The length of the blade makes it suitable for a variety of jobs, whether you are pruning trees, cutting firewood, or performing light logging tasks. The chain is designed for quick and efficient cutting, ensuring that users can accomplish their tasks with minimal effort.

Safety is a priority for Poulan, and this chainsaw features a chain brake that helps protect the user by stopping the chain in case of kickback. The front handguard and rear handle are ergonomically designed for a secure grip, reducing fatigue during extended use. Furthermore, the anti-vibration technology integrated into the design helps absorb shock, providing increased comfort and control when operating the chainsaw.

Maintenance is made easy with the Poulan 161608, as it features an automatic oiling system that ensures the chain remains lubricated, reducing wear and tear and extending the life of the chainsaw. Additionally, the tool-less chain tensioning system allows users to easily adjust the chain without the need for additional tools, making it more convenient for on-the-go maintenance.

In summary, the Poulan 161608 is a powerful and efficient chainsaw that combines user-friendly features, safety mechanisms, and ease of maintenance. With its robust engine, reliable cutting performance, and ergonomic design, it stands out as an excellent choice for anyone looking to tackle their outdoor cutting tasks effectively. Its thoughtful design and technology make it a worthy investment for both homeowners and professional users.
Top Page Image Contents