SERVICE AND ADJUSTMENTS

TO LEVEL MOWER HOUSING

Adjust the mower while tractor is parked on level ground or driveway. Make sure tires are properly inflated (See “PRODUCT SPECIFICATIONS” on page 2 of this manual). If tires are over or underinflated, you will not properly adjust your mower.

SIDE-TO-SIDE ADJUSTMENT (See Figs. 18 and 19)

Raise mower to its highest position.

At the midpoint of both sides of mower, measure height from bottom edge of mower to ground. Distance “A” on both sides of mower should be the same or within 1/4" of each other.

If adjustment is necessary, make adjustment on one side of mower only.

To raise one side of mower, tighten lift link adjustment nut on that side.

To lower one side of mower, loosen lift link adjustment nut on that side.

NOTE: Three full turns of adjustment nut will change mower height about 1/8".

Recheck measurements after adjusting.

FRONT-TO-BACK ADJUSTMENT (See Figs. 20 and 21)

IMPORTANT: DECK MUST BE LEVEL SIDE-TO-SIDE. IF THE FOLLOWING FRONT-TO-BACK ADJUSTMENT IS NECESSARY, BE SURE TO ADJUST BOTH FRONT LINKS EQUALLY SO MOWER WILL STAY LEVEL SIDE-TO-SIDE.

To obtain the best cutting results, the mower housing should be adjusted so that the front is approximately 1/8" to 1/2" lower than the rear when the mower is in its highest position.

BOTTOM EDGE

BOTTOM EDGE

OF MOWER TO

OF MOWER TO

GROUND

GROUND

Check adjustment on right side of tractor. Measure distance “D” directly in front and behind the mandrel at bottom edge of mower housing as shown.

Before making any necessary adjustments, check that both front links are equal in length. Both links should be approximately 10-3/8".

If links are not equal in length, adjust one link to same length as other link.

To lower front of mower loosen nut “E” on both front links an equal number of turns.

When distance “D” is 1/8" to 1/2" lower at front than rear, tighten nuts “F” against trunnion on both front links.

To raise front of mower, loosen nut “F” from trunnion on both front links. Tighten nut “E” on both front links an equal number of turns.

When distance “D” is 1/8" to 1/2" lower at front than rear, tighten nut “F” against trunnion on both front links.

Recheck side-to-side adjustment.

A

GROUND LINE

A

 

 

FIG. 18

SUSPENSION ARM

LIFT LINK

ADJUSTMENT NUT

FIG. 19

MANDREL

"D""D"

FIG. 20

BOTH FRONT LINKS MUST BE EQUAL IN LENGTH

NUT "E"

NUT "F"

FRONT LINKS

TRUNNION

21

FIG. 21

Page 21
Image 21
Poulan 161608 owner manual To Level Mower Housing, SIDE-TO-SIDE Adjustment See Figs, Raise mower to its highest position

161608 specifications

The Poulan 161608 chainsaw is a robust tool designed for homeowners and professionals alike, offering a blend of power, efficiency, and user-friendly features. This chainsaw is part of Poulan’s line of reliable outdoor power equipment, making it an excellent choice for tackling various cutting tasks, from trimming branches to felling small trees.

One of the main features of the Poulan 161608 is its powerful engine. It is equipped with a 38cc 2-stroke gas engine, which provides ample power for demanding cutting applications. The engine is designed for durability and reliability, ensuring that users can rely on the chainsaw for a range of tasks without frequent breakdowns. Additionally, the engine is engineered for easy starting, thanks to the incorporation of a primer bulb and an adjustable choke system. This allows users to start the chainsaw effortlessly, even in colder weather conditions.

The Poulan 161608 also boasts a 16-inch bar and chain, providing a balance between maneuverability and cutting capacity. The length of the blade makes it suitable for a variety of jobs, whether you are pruning trees, cutting firewood, or performing light logging tasks. The chain is designed for quick and efficient cutting, ensuring that users can accomplish their tasks with minimal effort.

Safety is a priority for Poulan, and this chainsaw features a chain brake that helps protect the user by stopping the chain in case of kickback. The front handguard and rear handle are ergonomically designed for a secure grip, reducing fatigue during extended use. Furthermore, the anti-vibration technology integrated into the design helps absorb shock, providing increased comfort and control when operating the chainsaw.

Maintenance is made easy with the Poulan 161608, as it features an automatic oiling system that ensures the chain remains lubricated, reducing wear and tear and extending the life of the chainsaw. Additionally, the tool-less chain tensioning system allows users to easily adjust the chain without the need for additional tools, making it more convenient for on-the-go maintenance.

In summary, the Poulan 161608 is a powerful and efficient chainsaw that combines user-friendly features, safety mechanisms, and ease of maintenance. With its robust engine, reliable cutting performance, and ergonomic design, it stands out as an excellent choice for anyone looking to tackle their outdoor cutting tasks effectively. Its thoughtful design and technology make it a worthy investment for both homeowners and professional users.