ASSEMBLY

SEAT PAN

LABEL

BATTERY

BOX DOOR

TERMINAL

TERMINAL

FIG. 2

INSTALL SEAT (See Fig. 3)

Adjust seat before tightening adjustment knob.

•Remove adjustment knob and flat washer securing seat to cardboard packing and set aside for assembly of seat to tractor.

•Pivot seat upward and remove from the cardboard packing. Remove the cardboard packing and discard.

•Place seat on seat pan so head of shoulder bolt is positioned over large slotted hole in pan.

•Push down on seat to engage shoulder bolt in slot and pull seat towards rear of tractor.

•Pivot seat and pan forward and assemble adjustment knob and flat washer loosely. Do not tighten.

•Lower seat into operating position and sit on seat.

•Slide seat until a comfortable position is reached which allows you to press clutch/brake pedal all the way down.

•Get off seat without moving its adjusted position.

•Raise seat and tighten adjustment knob securely.

SEAT

SEAT PAN

SHOULDER

BOLT

FLAT WASHER

ADJUSTMENT

KNOB

FIG. 3

NOTE: You may now roll or drive your tractor off the skid. Follow the appropriate instruction below to remove the tractor from the skid.

TO ROLL TRACTOR OFF SKID (See Opera- tion section, page 10, for location and function of controls)

•Press lift lever plunger and raise attachment lift lever to its highest position.

•Release parking brake by depressing clutch/brake pedal.

•Place gearshift lever in neutral (N) position.

•Roll tractor forward off skid.

•Remove banding holding deflector shield up against tractor.

TO DRIVE TRACTOR OFF SKID (See Opera- tion section, page 10, for location and func- tion of controls)

WARNING: Before starting, read, understand and follow all instructions in the Operation section of this manual. Be sure tractor is in a well-ventilated area. Be sure the area in front of tractor is clear of other people and objects.

•Be sure all the above assembly steps have been completed.

•Check engine oil level and fill fuel tank with gasoline.

•Sit on seat in operating position, depress clutch/brake pedal and set the parking brake.

•Place gear shift lever in neutral (N) position.

•Press lift lever plunger and raise attachment lift lever to its highest position.

•Start the engine. After engine has started, move throttle control to idle position.

•Depress clutch/brake pedal into full “BRAKE” position and hold. Move gearshift lever to 1st gear.

•Slowly release clutch/brake pedal and slowly drive tractor off skid.

•Apply brake to stop tractor, set parking brake and place gearshift lever in neutral position.

•Turn ignition key to “OFF” position.

Continue with the instructions that follow.

7

Page 6 Page 8
Page 7
Image 7
Poulan 175682 owner manual Install Seat See Fig
Page 6 Page 8

175682 specifications

The Poulan 175682 is a robust and versatile chainsaw designed for both residential and light commercial use. Known for its reliability and performance, it is a favorite among homeowners, landscapers, and those tackling outdoor projects. This chainsaw strikes a perfect balance between power and maneuverability, making it an excellent choice for cutting firewood, trimming trees, and clearing brush.

One of the main features of the Poulan 175682 is its powerful engine. Equipped with a 42cc two-stroke engine, it delivers consistent power to handle various cutting tasks efficiently. This engine is designed for optimal performance, ensuring that the saw runs smoothly even in demanding conditions. Additionally, the engine incorporates advanced technology that reduces fuel consumption and emissions, making it an environmentally friendly choice for users concerned about their ecological footprint.

The chainsaw's cutting capability is enhanced by a durable 18-inch bar and chain. The length provides enough reach to tackle larger logs while remaining manageable for precise cutting. The chain is designed for sharpness and longevity, enabling users to make clean cuts with minimal effort. Furthermore, the automatic oiler system ensures that the chain remains lubricated during operation, reducing wear and tear while prolonging the chainsaw's lifespan.

Another standout feature of the Poulan 175682 is its user-friendly design. The weight is well-balanced, allowing for easy handling and control during use. It comes equipped with an anti-vibration system, which minimizes vibrations felt by the operator, reducing fatigue during extended periods of cutting. Safety features, such as the chain brake and throttle lockout, add an extra layer of protection for users, making it a trustworthy option even for those new to chainsaw operation.

In terms of maintenance, the Poulan 175682 is designed with convenience in mind. The easily accessible air filter and spark plug make routine upkeep straightforward, enabling users to keep their chainsaw in top condition. With its combination of power, ease of use, and safety features, the Poulan 175682 is an excellent investment for anyone looking to tackle a variety of cutting tasks efficiently and safely. Whether for firewood preparation or yard maintenance, this chainsaw delivers the performance needed to get the job done effectively.
Top Page Image Contents