TROUBLESHOOTING POINTS

PROBLEM

CAUSE

CORRECTION

 

 

 

 

 

Engine continues to run

1.

Faulty operator-safety presence control system.

1.

Check wiring, switches and connections. If not

when operator leaves

 

 

 

corrected, contact an authorized service center/

seat with attachment

 

 

 

department.

clutch engaged

 

 

 

 

 

 

 

 

 

Poor cut - uneven

1.

Worn, bent or loose blade.

1.

Replace blade. Tighten blade bolt.

 

2.

Mower deck not level.

2.

Level mower deck.

 

3.

Buildup of grass, leaves, and trash under mower.

3.

Clean underside of mower housing.

 

4.

Bent blade mandrel.

4.

Replace blade mandrel.

 

5.

Clogged mower deck vent holes from buildup of

5.

Clean around mandrels to open vent holes.

 

 

grass, leaves, and trash around mandrels.

 

 

 

 

 

 

 

Mower blades will not

1.

Obstruction in clutch mechanism.

1.

Remove obstruction.

rotate

2.

Worn/damaged mower drive belt.

2.

Replace mower drive belt.

 

3.

Frozen idler pulley.

3.

Replace idler pulley.

 

4.

Frozen blade mandrel.

4.

Replace blade mandrel.

 

 

 

 

 

Poor grass discharge

1.

Engine speed too slow.

1.

Place throttle control in “FAST” position.

 

2.

Travel speed too fast.

2.

Shift to slower speed.

 

3.

Wet grass.

3.

Allow grass to dry before mowing.

 

4.

Mower deck not level.

4.

Level mower deck.

 

5.

Low/uneven tire air pressure.

5.

Check tires for proper air pressure.

 

6.

Worn, bent or loose blade.

6.

Replace/sharpen blade. Tighten blade bolt.

 

7.

Buildup of grass, leaves and trash under mower.

7.

Clean underside of mower housing.

 

8.

Mower drive belt worn.

8.

Replace mower drive belt.

 

9.

Blades improperly installed.

9.

Reinstall blades sharp edge down.

 

10.

Improper blades used.

10.

Replace with blades listed in this manual.

 

11.

Clogged mower deck vent holes from buildup of

11.

Clean around mandrels to open vent holes.

 

 

grass, leaves, and trash around mandrels.

 

 

 

 

 

 

 

Headlight(s) not working

1.

Switch is “OFF”.

1.

Turn switch “ON”.

(if so equipped)

2.

Bulb(s) or lamp(s) burned out.

2.

Replace bulb(s) or lamp(s).

 

3.

Faulty light switch.

3.

Check/replace light switch.

 

4.

Loose or damaged wiring.

4.

Check wiring and connections.

 

5.

Blown fuse.

5.

Replace fuse.

 

 

 

 

 

Battery will not charge

1.

Bad battery cell(s).

1.

Replace battery.

 

2.

Poor cable connections.

2.

Check/clean all connections.

 

3.

Faulty regulator (if so equipped).

3.

Replace regulator.

 

4.

Faulty alternator.

4.

Replace alternator.

 

 

 

 

 

Loss of drive

1.

Freewheel control in “disengaged” position.

1.

Place freewheel control in “engaged” position.

 

2.

Motion drive belt worn, damaged, or broken.

2.

Replace motion drive belt.

 

3.

Air trapped in transmission during shipment

3.

Purge transmission.

 

 

or servicing.

 

 

 

 

 

 

 

Engine “backfires”

1.

Engine throttle control not set at “SLOW”

1.

Move throttle control to “SLOW” position and allow

when turning engine

 

position for 30 seconds before stopping engine.

 

to idle for 30 seconds before stopping engine.

“OFF”

 

 

 

 

 

 

 

 

 

 

 

 

 

 

29

Page 28 Page 30
Page 29
Image 29
Poulan 177167 owner manual Off
Page 28 Page 30

177167 specifications

The Poulan 177167 is an advanced, high-performance chainsaw designed for both professional loggers and dedicated home users. Renowned for its robust construction and reliability, this model is engineered to handle a variety of cutting tasks, from felling trees to pruning branches and cutting firewood.

One of the standout features of the Poulan 177167 is its powerful 42cc engine, which provides ample strength for heavy-duty cutting applications. The engine is designed with a high horsepower-to-weight ratio, allowing users to operate the chainsaw efficiently without feeling overly fatigued. The easy start technology ensures that you can get going quickly without the frustration often associated with starting small engines.

This chainsaw incorporates a 16-inch bar, balanced for optimum maneuverability, making it suitable for various types of cutting jobs. The low-kickback chain design enhances user safety while providing smoother cutting action. The chain is also easy to replace and maintain, thanks to the tool-less chain tensioning feature. This allows for simple adjustments without the need for additional tools, making it convenient for users in the field.

Durability is a key characteristic of the Poulan 177167. The body of the chainsaw is constructed from high-quality materials designed to withstand the rigors of demanding tasks. Additionally, it features an automatic oiling system which continuously lubricates the chain, reducing wear and extending the life of the bar and chain assembly.

User comfort is prioritized in the design of the Poulan 177167, which includes a comfortable, ergonomically designed handle that reduces vibration and enhances grip. This minimizes hand fatigue during prolonged use, allowing users to stay focused on their cutting tasks.

Safety mechanisms such as the chain brake and throttle interlock are incorporated to protect users from accidents. The chain brake activates automatically during a kickback, stopping the chain instantly and providing peace of mind while operating the saw.

In summary, the Poulan 177167 is a feature-rich chainsaw designed for both versatility and durability. It combines a powerful engine with user-friendly technologies and safety features, making it an excellent choice for anyone in need of reliable cutting performance, whether for professional logging or home landscaping projects.
Top Page Image Contents