SERVICE AND ADJUSTMENTS

TRANSMISSION REMOVAL/REPLACEMENT

Should your transmission require removal for service or replacement, it should be purged after reinstallation and before operating the tractor. See “PURGE TRANSMIS- SION” in the Operation section of this manual.

TO ADJUST STEERING WHEEL ALIGNMENT

If steering wheel crossbars are not horizontal (left to right) when wheels are positioned straight forward, remove steer- ing wheel and reassemble per instructions in the Assembly section of this manual.

FRONT WHEEL TOE-IN/CAMBER

The front wheel toe-in and camber are not adjustable on your tractor. If damage has occurred to affect the front wheel toe-in or camber, contact your nearest authorized service center/department.

TO REMOVE WHEEL FOR REPAIRS (See Fig. 32)

Block up axle securely.

Remove axle cover, retaining ring and washers to allow wheel removal (rear wheel contains a square key - Do not lose).

Repair tire and reassemble.

On rear wheels only: align grooves in rear wheel hub and axle. Insert square key.

Replace washers and snap retaining ring securely in axle groove.

Replace axle cover.

NOTE: To seal tire punctures and prevent flat tires due to slow leaks, tire sealant may be purchased from your local parts dealer. Tire sealant also prevents tire dry rot and corrosion.

WASHERS

RETAINING

RING

AXLE

COVER

SQUARE KEY

(REAR WHEEL ONLY)

FIG. 32

TO START ENGINE WITH A WEAK BATTERY (See Fig. 33)

CAUTION: Lead-acid batteries generate explosive gases. Keep sparks, flame and smoking materials away from bat- teries. Always wear eye protection when around batteries.

If your battery is too weak to start the engine, it should be recharged. (See "BATTERY" in the CUSTOMER RESPON- SIBILITIES section of this manual).

If “jumper cables” are used for emergency starting, follow this procedure:

IMPORTANT: YOUR TRACTOR IS EQUIPPED WITH A 12 VOLT NEGATIVE GROUNDED SYSTEM. THE OTHER VEHICLE MUST ALSO BE A 12 VOLT NEGATIVE GROUNDED SYSTEM. DO NOT USE YOUR TRACTOR BATTERY TO START OTHER VEHICLES.

TO ATTACH JUMPER CABLES -

Connect each end of the RED cable to the POSITIVE (+) terminal of each battery, taking care not to short against chassis.

Connect one end of the BLACK cable to the NEGATIVE (-) terminal of fully charged battery.

Connect the other end of the BLACK cable to good CHASSIS GROUND, away from fuel tank and battery.

TO REMOVE CABLES, REVERSE ORDER -

BLACK cable first from chassis and then from the fully charged battery.

RED cable last from both batteries.

“POSITIVE”

“NEGATIVE”

(+)

(-)

L.H. PANEL

 

BOLT

 

FIG. 33

24

Page 24
Image 24
Poulan 178249 owner manual Transmission REMOVAL/REPLACEMENT, To Adjust Steering Wheel Alignment, Front Wheel TOE-IN/CAMBER

178249 specifications

The Poulan 178249 is a robust and versatile chainsaw designed for both professional and residential use. Renowned for its reliability and efficiency, this model stands out in the competitive market of outdoor power tools. One of the main features of the Poulan 178249 is its powerful 18-inch bar and chain, which allows users to tackle a wide range of cutting tasks, from firewood preparation to tree trimming.

Equipped with a 42cc 2-cycle engine, the Poulan 178249 provides ample power while maintaining a manageable weight, making it easier to handle for extended periods. The lightweight design is coupled with an ergonomic handle that offers comfort and control, reducing strain on the user’s hands and arms during operation. This makes the chainsaw particularly suitable for both seasoned professionals and occasional users.

One of the standout technologies in the Poulan 178249 is its Easy Start system, which significantly reduces the effort needed to start the engine. This feature is especially beneficial for those who may struggle with traditional pull-start mechanisms, allowing for a smoother experience right from the beginning of use. Additionally, the chainsaw comes with an integrated air filtration system that prolongs the life of the engine by ensuring cleaner airflow, which helps maintain optimal performance over time.

Another characteristic that sets the Poulan 178249 apart is its built-in chain brake safety feature. This critical component halts chain movement in the event of kickback, providing an added layer of protection for users. The adjustable chain tensioning system also allows for quick and easy adjustments on the go, ensuring that the chain remains properly tightened for efficient cutting.

Moreover, the Poulan 178249 has a translucent fuel tank that enables users to easily monitor fuel levels, reducing the risk of running out of fuel mid-task. This user-friendly design, along with the chainsaw’s durable construction, makes it suitable for various cutting applications in different environments.

In summary, the Poulan 178249 combines powerful performance, advanced technology, and user-oriented features, making it an excellent choice for anyone looking to invest in a reliable chainsaw. Whether you are maintaining your yard, clearing storm debris, or preparing firewood for the winter, this model is equipped to handle the demands of the job.