SERVICE AND ADJUSTMENTS

L.H. MANDREL

MOWER BLADE DRIVE BELT CENTER MANDREL

IDLER PULLEY

R.H.

MANDREL

COVER

SECONDARY IDLER ARM

SPRING SWAY-BAR

BRACKET SCREW

FIG. 28

TO ADJUST BRAKE (See Fig. 29)

Your tractor is equipped with an adjustable brake system which is mounted on the side of the transaxle.

If tractor requires more than six (6) feet stopping distance at high speed in highest gear on a level dry concrete or paved surface, then brake must be adjusted.

Depress clutch/brake pedal and engage parking brake.

Measure distance between brake operating arm and nut “A” on brake rod.

If distance is other than 1-9/16", loosen jam nut and turn nut “A” until distance becomes 1-9/16". Retighten jam nut against nut “A”.

Road test tractor for proper stopping distance as stated above. Readjust if necessary. If stopping distance is still greater than six (6) feet in highest gear, further maintenance is necessary. Contact your nearest au- thorized service center/department.

WITH PARKING

 

NUT

 

BRAKE

1-9/16"

“A”

JAM NUT

 

 

“ENGAGED”

OPERATING

ARM

DO NOT TOUCH THIS NUT. IF FURTHER BRAKE ADJUST- MENT IS NECESSARY CONTACT YOUR NEAREST AUTHO- RIZED SERVICE CENTER/DEPARTMENT

FIG. 29

TO REPLACE MOTION DRIVE BELT (See Fig. 30)

Park the tractor on level surface. Engage parking brake. For assistance, there is a belt installation guide decal on bottom side of left footrest.

Remove mower (See “TO REMOVE MOWER” in this section of this manual.)

Disconnect clutch wire harness.

Remove clutch locator.

Remove belt from stationary idler and clutching idler.

Pull belt slack toward rear of tractor. Carefully remove belt upwards from transmission input pulley and over cooling fan blades.

Pull belt toward front of tractor and remove downwards from around electric clutch.

Install new belt by reversing above procedure.

ELECTRIC

CLUTCH LOCATOR

CLUTCH

 

CLUTCHING

IDLER

STATIONARY

IDLER

TRANSMISSION

INPUT PULLEYCLUTCH WIRE HARNESS

FIG. 30

TRANSAXLE MOTION CONTROL LEVER NEUTRAL ADJUSTMENT (See Fig. 31)

The motion control lever has been preset at the factory and adjustment should not be necessary.

Loosen adjustment bolt in front of the right rear wheel, and lightly tighten.

Start engine and move motion control lever until tractor does not move forward or backward.

Hold motion control lever in that position and turn engine off.

While holding motion control lever in place, loosen the adjustment bolt.

Move motion control lever to the neutral (N) (lock gate) position.

Tighten adjustment bolt securely.

NOTE: If additional clearance is needed to get to adjust- ment bolt, move mower deck height to the lowest position.

After above adjustment is made, if the tractor still creeps forward or backward while motion control lever is in neutral position, follow these steps:

Loosen the adjustment bolt.

Move the motion control lever 1/4 to 1/2 inch in the direction it is trying to creep.

Tighten adjustment bolt securely.

Start engine and test.

If tractor still creeps, repeat above steps until satisfied.

MOTION CONTROL

NEUTRAL

LEVER

LOCK

 

GATE

 

ADJUSTMENT BOLT

FIG. 31

23

Page 23
Image 23
Poulan 178249 owner manual To Adjust Brake See Fig, To Replace Motion Drive Belt See Fig

178249 specifications

The Poulan 178249 is a robust and versatile chainsaw designed for both professional and residential use. Renowned for its reliability and efficiency, this model stands out in the competitive market of outdoor power tools. One of the main features of the Poulan 178249 is its powerful 18-inch bar and chain, which allows users to tackle a wide range of cutting tasks, from firewood preparation to tree trimming.

Equipped with a 42cc 2-cycle engine, the Poulan 178249 provides ample power while maintaining a manageable weight, making it easier to handle for extended periods. The lightweight design is coupled with an ergonomic handle that offers comfort and control, reducing strain on the user’s hands and arms during operation. This makes the chainsaw particularly suitable for both seasoned professionals and occasional users.

One of the standout technologies in the Poulan 178249 is its Easy Start system, which significantly reduces the effort needed to start the engine. This feature is especially beneficial for those who may struggle with traditional pull-start mechanisms, allowing for a smoother experience right from the beginning of use. Additionally, the chainsaw comes with an integrated air filtration system that prolongs the life of the engine by ensuring cleaner airflow, which helps maintain optimal performance over time.

Another characteristic that sets the Poulan 178249 apart is its built-in chain brake safety feature. This critical component halts chain movement in the event of kickback, providing an added layer of protection for users. The adjustable chain tensioning system also allows for quick and easy adjustments on the go, ensuring that the chain remains properly tightened for efficient cutting.

Moreover, the Poulan 178249 has a translucent fuel tank that enables users to easily monitor fuel levels, reducing the risk of running out of fuel mid-task. This user-friendly design, along with the chainsaw’s durable construction, makes it suitable for various cutting applications in different environments.

In summary, the Poulan 178249 combines powerful performance, advanced technology, and user-oriented features, making it an excellent choice for anyone looking to invest in a reliable chainsaw. Whether you are maintaining your yard, clearing storm debris, or preparing firewood for the winter, this model is equipped to handle the demands of the job.