SAFETY RULES

SAFE OPERATION PRACTICES FOR WALK-BEHIND POWERED ROTARY TILLERS

TRAINING

Read the Owner’s Manual carefully. Be thoroughly familiar with the controls and the proper use of the equipment. Know how to stop the unit and disengage the controls quickly.

Never allow children to operate the equipment. Never allow adults to operate the equipment without proper instruction.

Keep the area of operation clear of all persons, par- ticularly small children, and pets.

PREPARATION

Thoroughly inspect the area where the equipment is to be used and remove all foreign objects.

Disengage all clutches and shift into neutral before starting the engine (motor).

Never operate the tiller without proper guards, plates, or other safety protective devices in place.

Keep children and pets away.

Do not overload the machine capacity by attempting to till too deep at too fast a rate.

Never operate the machine at high speeds on slippery surfaces. Look behind and use care when backing.

Never allow bystanders near the unit.

Use only attachments and accessories approved by the manufacturer of the tiller.

Never operate the tiller without good visibility or light.

Be careful when tilling in hard ground. The tines may catch in the ground and propel the tiller forward. If this occurs, let go of the handlebars and do not restrain the machine.

Do not operate the equipment without wearing ade- quate outer garments. Wear footwear that will improve footing on slippery surfaces.

Handle fuel with care; it is highly flammable.

Use an approved fuel container.

Never add fuel to a running engine or hot engine.

Fill fuel tank outdoors with extreme care. Never fill fuel tank indoors.

Replace gasoline cap securely and clean up spilled fuel before restarting.

Use extension cords and receptacles as specified by the manufacturer for all units with electric drive motors or electric starting motors.

Never attempt to make any adjustments while the engine (motor) is running (except where specifically recommended by manufacturer).

OPERATION

Do not put hands or feet near or under rotating parts.

Exercise extreme caution when operating on or cross- ing gravel drives, walks, or roads. Stay alert for hidden hazards or traffic. Do not carry passengers.

After striking a foreign object, stop the engine (motor), remove the wire from the spark plug, thoroughly inspect the tiller for any damage, and repair the damage before restarting and operating the tiller.

Exercise caution to avoid slipping or falling.

If the unit should start to vibrate abnormally, stop the engine (motor) and check immediately for the cause. Vibration is generally a warning of trouble.

Stop the engine (motor) when leaving the operating position.

Take all possible precautions when leaving the machine unattended. Disengage the tines, shift into neutral, and stop the engine.

Before cleaning, repairing, or inspecting, shut off the engine and make certain all moving parts have stopped. Disconnect the spark plug wire, and keep the wire away from the plug to prevent accidental starting.Disconnect the cord on electric motors.

Do not run the engine indoors; exhaust fumes are dangerous.

MAINTENANCE AND STORAGE

Keep machine, attachments, and accessories in safe working condition.

Check shear pins, engine mounting bolts, and other bolts at frequent intervals for proper tightness to be sure the equipment is in safe working condition.

Never store the machine with fuel in the fuel tank inside a building where ignition sources are present, such as hot water and space heaters, clothes dryers, and the like. Allow the engine to cool before storing in any enclosure.

Always refer to the operator’s guide instructions for important details if the tiller is to be stored for an ex- tended period.

- IMPORTANT -

CAUTIONS, IMPORTANTS, AND NOTES ARE A MEANS OF ATTRACTING ATTENTION TO IMPORTANT OR CRITICAL INFORMATION IN THIS MANUAL.

IMPORTANT: USED TO ALERT YOU THAT THERE IS A POSSIBILITY OF DAMAGING THIS EQUIPMENT.

NOTE: Gives essential information that will aid you to better understand, incorporate, or execute a particular set of instructions.

Look for this symbol to point out im- portant safety precautions. It means CAUTION!!! BECOME ALERT!!! YOUR SAFETY IS INVOLVED.

CAUTION: Always disconnect spark plug wire and place wire where it can- not contact spark plug in order to pre- vent accidental starting when setting up, transporting, adjusting or making repairs.

WARNING

The engine exhaust from this product contains chemicals known to the State of California to cause cancer, birth defects, or other reproduc- tive harm.

2

Page 2
Image 2
Poulan 181121 owner manual Safety Rules, Training, Preparation, Operation, Maintenance and Storage

181121 specifications

The Poulan 181121 is a versatile and powerful tool designed for homeowners and professionals alike, especially those in need of a reliable chainsaw for various cutting tasks. Known for its user-friendly design and impressive performance, this chainsaw stands out in the crowded market of outdoor power equipment.

One of the key features of the Poulan 181121 is its robust engine. Powered by a 18-inch bar and a reliable 42cc 2-cycle engine, this chainsaw delivers strong cutting power, making it suitable for a range of applications including tree trimming, firewood cutting, and tackling larger fallen branches. The combination of engine power and bar length ensures efficient performance, allowing users to handle even challenging jobs with ease.

Another noteworthy characteristic of the Poulan 181121 is its ergonomic design. The chainsaw is equipped with an anti-vibration handle, helping to reduce user fatigue during extended use. This feature is particularly beneficial for those who may spend long hours handling the tool, as it enhances comfort and control. Additionally, the chainsaw is lightweight, which further contributes to its ease of handling.

The Poulan 181121 also incorporates several advanced technologies that enhance its usability and longevity. One such technology is the automatic oiling system, which ensures that the bar and chain remain adequately lubricated during operation. This not only prolongs the life of the chainsaw but also improves cutting efficiency and reduces wear and tear.

Moreover, maintenance is made simple with the easy-access air filter and tool-less chain tension adjustment features. These innovations allow users to maintain their chainsaw with minimal hassle, ensuring that they can get back to work quickly and efficiently.

Finally, the Poulan 181121 prioritizes safety, featuring a safety chain brake that minimizes the risk of accidents during use. The combination of safety features and effective design makes this chainsaw a responsible choice for both new and experienced users.

In summary, the Poulan 181121 offers a perfect blend of power, comfort, and convenience. With its efficient engine, ergonomic design, and advanced technologies, it is an ideal choice for anyone looking to tackle outdoor cutting tasks. Whether for personal use or professional landscaping, the Poulan 181121 proves to be a reliable and robust chainsaw that stands up to the job.