SERVICE AND ADJUSTMENTS

TO LEVEL MOWER HOUSING

Adjust the mower while tractor is parked on level ground or driveway. Make sure tires are properly inflated (See “PROD- UCT SPECIFICATIONS” section of this manual). If tires are over or underinflated, you will not properly adjust your mower.

SIDE-TO-SIDE ADJUSTMENT (See Figs. 17 and 18)

•Raise mower to its highest position.

•At the midpoint of both sides of mower, measure height from bottom edge of mower to ground. Distance “A” on both sides of mower should be the same or within 1/4" of each other.

•If adjustment is necessary, make adjustment on one side of mower only.

•To raise one side of mower, tighten lift link adjustment nut on that side.

•To lower one side of mower, loosen lift link adjustment nut on that side.

NOTE: Each full turn of adjustment nut will change mower height about 1/8".

•Recheck measurements after adjusting.

BOTTOM EDGE

 

BOTTOM EDGE

OF MOWER TO

 

OF MOWER TO

GROUND

 

GROUND

A

GROUND LINE

A

FIG. 17

SUSPENSION

ARM

LIFT LINK

ADJUSTMENT NUT

FIG. 18

FRONT-TO-BACK ADJUSTMENT (See Figs. 19 and 20)

IMPORTANT: DECK MUST BE LEVEL SIDE-TO-SIDE. IF THE FOLLOWING FRONT-TO-BACK ADJUSTMENT IS NECESSARY, BE SURE TO ADJUST BOTH FRONT LINKS EQUALLY SO MOWER WILL STAY LEVEL SIDE-TO- SIDE.

To obtain the best cutting results, the mower housing should be adjusted so that the front is approximately 1/8" to 1/2" lower than the rear when the mower is in its highest position.

Check adjustment on right side of tractor. Measure distance “D” directly in front and behind the mandrel at bottom edge of mower housing as shown.

•Before making any necessary adjustments, check that both front links are equal in length.

•If links are not equal in length, adjust one link to same length as other link.

•To lower front of mower loosen nut “E” on both front links an equal number of turns.

•When distance “D” is 1/8" to 1/2" lower at front than rear, tighten nuts “F” against trunnion on both front links.

•To raise front of mower, loosen nut “F” from trunnion on both front links. Tighten nut “E” on both front links an equal number of turns. The two front links must remain equal in length.

•When distance “D” is 1/8" to 1/2" lower at front than rear, tighten nut “F” against trunnion on both front links.

•Recheck side-to-side adjustment.

MANDREL

“D”

“D”

FIG. 19

BOTH FRONT LINKS MUST BE EQUAL IN LENGTH

NUT “F”

NUT “E”

TRUNNION

FRONT LINKS

FIG. 20

TO REPLACE MOWER BLADE DRIVE BELT (See Fig. 21)

The mower blade drive belt may be replaced without tools. Park the tractor on level surface. Engage parking brake.

BELT REMOVAL -

•Remove mower from tractor (See “TO REMOVE MOWER” in this section of this manual).

•Work belt off both mandrel pulleys and idler pulleys.

•Pull belt away from mower.

BELT INSTALLATION -

•Install new belt in reverse order of removal.

•Make sure belt is in all pulley grooves and inside all belt guides.

•Install mower in reverse order of removal instructions.

20

Page 19 Page 21
Page 20
Image 20
Poulan 183359 owner manual To Level Mower Housing, To Replace Mower Blade Drive Belt See Fig
Page 19 Page 21

183359 specifications

The Poulan 183359 is a versatile and efficient chainsaw designed for both homeowners and professionals. Known for its reliability and power, this chainsaw features a robust engine and an array of advanced technologies that make it a top choice for cutting tasks, whether you're trimming branches or tackling larger trees.

One of the main features of the Poulan 183359 is its powerful 38cc two-stroke engine. This engine provides a balance of performance and efficiency, allowing users to cut through tough wood with ease while maintaining fuel economy. The chainsaw is designed to deliver a high power-to-weight ratio, ensuring that it remains lightweight and easy to handle without sacrificing cutting performance.

The Poulan 183359 incorporates an automatic oiling system, which is critical for maintaining the chain's lubrication during operation. This feature not only prolongs the life of the chain but also enhances cutting efficiency by reducing friction. The adjustable flow allows users to customize the oil output depending on the specific task, ensuring optimal performance in various cutting conditions.

Safety is a paramount concern with any power tool, and the Poulan 183359 does not disappoint in this area. It includes a chain brake that can be activated to halt the chain immediately in case of kickback. Additionally, the chainsaw is equipped with a front hand guard, which protects the user's hands from debris and potential injuries while operating.

The design of the Poulan 183359 also emphasizes user comfort. It features an anti-vibration system that minimizes vibrations transferred to the user's hands, reducing fatigue during extended periods of use. Moreover, the ergonomic handle design provides a secure grip, enabling precise control while cutting.

Another notable characteristic is its easy-start technology, which makes starting the engine simpler and more reliable. This feature is particularly beneficial for users who may struggle with traditional starting methods, allowing them to get to work quickly.

With its combination of power, safety features, and user-friendly design, the Poulan 183359 is highly regarded in its category. Whether you are a seasoned professional or a homeowner looking to tackle yard work, this chainsaw delivers performance and reliability, making it an essential tool for any outdoor project. Its well-rounded capabilities make it a dependable choice for those seeking an effective and efficient cutting solution.
Top Page Image Contents