ASSEMBLY

INSTALL SEAT (See Fig. 3)

Adjust seat before tightening adjustment knob.

•Remove adjustment knob and flat washer securing seat to cardboard packing and set aside for assembly of seat to tractor.

•Pivot seat upward and remove from the cardboard packing. Remove the cardboard packing and discard.

•Place seat on seat pan so head of shoulder bolt is positioned over large slotted hole in pan.

•Push down on seat to engage shoulder bolt in slot and pull seat towards rear of tractor.

•Pivot seat and pan forward and assemble adjustment knob and flat washer loosely. Do not tighten.

•Lower seat into operating position and sit on seat.

•Slide seat until a comfortable position is reached which allows you to press clutch/brake pedal all the way down.

•Get off seat without moving its adjusted position.

•Raise seat and tighten adjustment knob securely.

SEAT

SEAT PAN

SHOULDER

BOLT

FLAT WASHER

ADJUSTMENT

KNOB

FIG. 3

NOTE: You may now roll or drive your tractor off the skid. Follow the appropriate instruction below to remove the tractor from the skid.

TO ROLL TRACTOR OFF SKID (See Opera- tion section, page 10, for location and function of controls)

•Press lift lever plunger and raise attachment lift lever to its highest position.

•Release parking brake by depressing clutch/brake pedal.

•Place gearshift lever in neutral (N) position.

•Roll tractor forward off skid.

•Remove banding holding deflector shield up against tractor.

TO DRIVE TRACTOR OFF SKID (See Opera- tion section, page 10, for location and func- tion of controls)

WARNING: Before starting, read, understand and follow all instructions in the Operation section of this manual. Be sure tractor is in a well-ventilated area. Be sure the area in front of tractor is clear of other people and objects.

•Be sure all the above assembly steps have been completed.

•Check engine oil level and fill fuel tank with gasoline.

•Sit on seat in operating position, depress clutch/brake pedal and set the parking brake.

•Place gear shift lever in neutral (N) position.

•Press lift lever plunger and raise attachment lift lever to its highest position.

•Start the engine. After engine has started, move throttle control to idle position.

•Depress clutch/brake pedal into full “BRAKE” position and hold. Move gearshift lever to 1st gear.

•Slowly release clutch/brake pedal and slowly drive tractor off skid.

•Apply brake to stop tractor, set parking brake and place gearshift lever in neutral position.

•Turn ignition key to “OFF” position.

Continue with the instructions that follow.

7

Page 6 Page 8
Page 7
Image 7
Poulan 183359 owner manual Install Seat See Fig
Page 6 Page 8

183359 specifications

The Poulan 183359 is a versatile and efficient chainsaw designed for both homeowners and professionals. Known for its reliability and power, this chainsaw features a robust engine and an array of advanced technologies that make it a top choice for cutting tasks, whether you're trimming branches or tackling larger trees.

One of the main features of the Poulan 183359 is its powerful 38cc two-stroke engine. This engine provides a balance of performance and efficiency, allowing users to cut through tough wood with ease while maintaining fuel economy. The chainsaw is designed to deliver a high power-to-weight ratio, ensuring that it remains lightweight and easy to handle without sacrificing cutting performance.

The Poulan 183359 incorporates an automatic oiling system, which is critical for maintaining the chain's lubrication during operation. This feature not only prolongs the life of the chain but also enhances cutting efficiency by reducing friction. The adjustable flow allows users to customize the oil output depending on the specific task, ensuring optimal performance in various cutting conditions.

Safety is a paramount concern with any power tool, and the Poulan 183359 does not disappoint in this area. It includes a chain brake that can be activated to halt the chain immediately in case of kickback. Additionally, the chainsaw is equipped with a front hand guard, which protects the user's hands from debris and potential injuries while operating.

The design of the Poulan 183359 also emphasizes user comfort. It features an anti-vibration system that minimizes vibrations transferred to the user's hands, reducing fatigue during extended periods of use. Moreover, the ergonomic handle design provides a secure grip, enabling precise control while cutting.

Another notable characteristic is its easy-start technology, which makes starting the engine simpler and more reliable. This feature is particularly beneficial for users who may struggle with traditional starting methods, allowing them to get to work quickly.

With its combination of power, safety features, and user-friendly design, the Poulan 183359 is highly regarded in its category. Whether you are a seasoned professional or a homeowner looking to tackle yard work, this chainsaw delivers performance and reliability, making it an essential tool for any outdoor project. Its well-rounded capabilities make it a dependable choice for those seeking an effective and efficient cutting solution.
Top Page Image Contents