MAINTENANCE

TRACTOR

Always observe safety rules when performing any main- tenance.

BRAKE OPERATION

If tractor requires more than six (6) feet stopping distance at high speed in highest gear, then brake must be adjusted. (See “TO ADJUST BRAKE” in the Service and Adjustments section of this manual).

TIRES

Maintain proper air pressure in all tires (See“PRODUCT SPECIFICATIONS” section of this manual).

Keep tires free of gasoline, oil, or insect control chemi- cals which can harm rubber.

Avoid stumps, stones, deep ruts, sharp objects and other hazards that may cause tire damage.

NOTE: To seal tire punctures and prevent flat tires due to slow leaks, tire sealant may be purchased from your local parts dealer. Tire sealant also prevents tire dry rot and corrosion.

OPERATOR PRESENCE SYSTEM

Be sure operator presence and interlock systems are work- ing properly. If your tractor does not function as described, repair the problem immediately.

The engine should not start unless the clutch/brake pedal is fully depressed and attachement clutch control is in the disengaged position.

When the engine is running, any attempt by the operator to leave the seat without first setting the parking brake should shut off the engine.

When the engine is running and the attachment clutch is engaged, any attempt by the operator to leave the seat should shut off the engine.

The attachment clutch should never operate unless the operator is in the seat.

BLADE CARE

For best results mower blades must be kept sharp. Replace bent or damaged blades.

BLADE REMOVAL (See Fig. 8)

Raise mower to highest position to allow access to blades.

Remove blade bolt, lock washer and flat washer securing blade.

Install new or resharpened blade with trailing edge up towards deck as shown.

IMPORTANT: TO ENSURE PROPER ASSEMBLY, CENTER HOLE IN BLADE MUST ALIGN WITH STAR ON MANDREL ASSEMBLY.

Reassemble blade bolt, lock washer and flat washer in exact order as shown.

Tighten blade bolt securely (27-35 Ft. Lbs. torque).

IMPORTANT: BLADE BOLT IS HEATTREATED.IF BOLT NEEDS REPLACING, REPLACE ONLY WITH APPROVE BOLT SHOWN IN THE REPAIR PARTS.

TRAILING

MANDREL

EDGE UP BLADE

ASSEMBLY

CENTER

 

HOLE

 

FLAT WASHER

 

LOCK WASHER

 

 

STAR

BLADE BOLT

 

FIG. 8

TO SHARPEN BLADE (See Fig. 9)

NOTE: We do not recommend sharpening blade - but if you do, be sure the blade is balanced.

Care should be taken to keep the blade balanced. An un- balanced blade will cause excessive vibration and eventual damage to mower and engine.

The blade can be sharpened with a file or on a grind- ing wheel. Do not attempt to sharpen while on the mower.

To check blade balance, you will need a 5/8" diameter steel bolt, pin, or a cone balancer. (When using a cone balancer, follow the instructions supplied with balancer.)

NOTE: Do not use a nail for balancing blade. The lobes of the center hole may appear to be centered, but are not.

Slide blade on to an unthreaded portion of the steel bolt or pin and hold the bolt or pin parallel with the ground. If blade is balanced, it should remain in a horizontal position. If either end of the blade moves downward, sharpen the heavy end until the blade is balanced.

 

CENTER HOLE

5/8" BOLT

BLADE

 

OR PIN

 

FIG. 9

BATTERY

Your tractor has a battery charging system which is sufficient for normal use. However, periodic charging of the battery with an automotive charger will extend its life.

Keep battery and terminals clean.

Keep battery bolts tight.

Keep small vent holes open.

Recharge at 6-10 amperes for 1 hour.

NOTE: The original equipment battery on your tractor is maintenance free. Do not attempt to open or remove caps or covers. Adding or checking level of electrolyte is not necessary.

15

Page 15
Image 15
Poulan 188870 manual Tractor

188870 specifications

The Poulan 188870 is a powerful and versatile chainsaw designed for both professionals and avid gardeners. Engineered for cutting through various types of wood, from hardwoods to softwoods, the Poulan 188870 showcases a combination of performance and ease of use.

One of the standout features of the Poulan 188870 is its robust engine. It incorporates a 18-inch bar and chain that delivers the necessary power for trimming branches, felling small trees, and cutting firewood. The chainsaw is powered by a reliable 50cc two-stroke engine, which is known for its efficiency and ability to handle tough tasks with minimal downtime.

The design of the Poulan 188870 includes advanced technologies aimed at improving user experience. The chainsaw is equipped with an easy-start feature, allowing for a hassle-free ignition. This saves precious time, particularly in situations where quick operation is essential. The Automatic Oiling System ensures that the chain is adequately lubricated during operation, enhancing performance and extending the lifespan of the bar and chain.

Safety is a significant consideration in the design of the Poulan 188870. It features a chain brake that activates in case of kickback, significantly reducing the risk of accidents. Additionally, with its ergonomic handle, the chainsaw is not only comfortable to hold but also minimizes vibrations, making operations smoother and reducing fatigue during prolonged use.

Another attractive characteristic of the Poulan 188870 is its lightweight construction. Weighing just over 12 pounds, it is relatively easy to maneuver, making it suitable for all-day use without causing excessive strain on the user. This is particularly beneficial for homeowners who may not have extensive experience with power tools.

In terms of maintenance, the Poulan 188870 makes it easy for users to perform routine checks and repairs. The accessible air filter and spark plug facilitate straightforward servicing, which is essential for keeping the chainsaw in optimal working condition.

Overall, the Poulan 188870 combines power, efficiency, and safety features that cater to a wide range of users. It stands out as a reliable choice for anyone in need of a dependable chainsaw for gardening or lumber work. Its balance of performance and user-friendly characteristics makes it a favorite among chainsaw enthusiasts.