SERVICE AND ADJUSTMENTS

WARNING: TO AVOID SERIOUS INJURY, BEFORE PERFORMING ANY SERVICE OR ADJUST- MENTS:

•Depress clutch/brake pedal fully and set parking brake.

•Place gearshift lever in neutral (N) position.

•Place attachment clutch in “DISENGAGED” position.

•Turn ignition key to “STOP” and remove key.

•Make sure the blades and all moving parts have completely stopped.

•Disconnect spark plug wire from spark plug and place wire where it cannot come in contact with plug.

TRACTOR

TO REMOVE MOWER (See Fig. 13)

Mower will be easier to remove from the right side of trac- tor.

•Place attachment clutch in “DISENGAGED” position.

•Move attachment lift lever forward to lower mower to its lowest position.

•Roll belt off engine pulley.

•Remove small retainer spring, and remove clutch spring off pulley bolt.

•Remove large retainer spring, slide collar off and push housing guide out of bracket.

•Disconnect anti-swaybar from chassis bracket by re- moving retainer spring.

•Disconnect suspension arms from rear deck brackets by removing retainer springs.

•Disconnect front links from deck by removing retainer springs.

•Raise lift lever to raise suspension arms. Slide mower out from under tractor.

IMPORTANT: IF AN ATTACHMENT OTHER THAN THE MOWER DECK IS TO BE MOUNTED ON THE TRACTOR, REMOVE THE FRONTLINKSANDHOOKTHECLUTCHSPRINGINTOSQUARE HOLE IN FRAME.

TO INSTALL MOWER (See Fig. 13)

•Raise attachment lift lever to its highest position.

•Slide mower under tractor with deflector shield to right side of tractor.

•Lower lift lever to its lowest position.

•Connect front links to mower deck and secure with retainer springs..

•Connect suspension arms to rear deck brackets and secure with retainer springs.

•Connect anti-swaybar to chassis bracket and secure with retainer spring.

•Push clutch cable housing guide into bracket, slide col- lar onto guide and secure with large retainer spring.

•Place flat washer and clutch spring on idler pulley bolt and secure with small retainer spring.

•Install belt onto engine pulley.

 

SMALL RETAINER SPRING

 

 

 

CLUTCH SPRING

 

 

 

FLAT WASHER

 

SQUARE HOLE

SMALL RETAINER SPRING

SUSPENSION

ENGINE PULLEY

ARMS

 

 

 

 

 

CLUTCH SPRING

 

 

 

 

 

 

FRONT LINK

RETAINER SPRING

 

 

 

ANTI-SWAY BAR

 

 

 

 

 

 

RETAINER SPRINGS

COLLAR

 

 

(BOTH SIDES)

 

 

 

 

LARGE

 

 

HOUSING GUIDE

RETAINER

 

 

 

SPRING

 

 

 

BRACKET

 

DEFLECTOR SHIELD

 

 

 

FIG. 13

18

Page 17 Page 19
Page 18
Image 18
Poulan 190781 manual Service and Adjustments, To Remove Mower See Fig, To Install Mower See Fig
Page 17 Page 19

190781 specifications

The Poulan 190781 is a versatile and powerful tool designed for both professional and home use, specifically catering to the needs of outdoor landscape maintenance and tree care. This chainsaw is engineered to deliver exceptional performance, ensuring that tasks like pruning, trimming, and cutting firewood are handled with ease and efficiency.

One of the standout features of the Poulan 190781 is its robust engine. Powered by a reliable 42cc engine, this chainsaw provides ample power for cutting through tough wood while maintaining efficient fuel consumption. The engine is engineered with advanced technologies that minimize emissions and reduce fuel consumption, making it an environmentally friendly choice for users who are conscious of their ecological footprint.

The chainsaw also features an 18-inch bar and chain, which strikes a perfect balance between maneuverability and cutting capacity. This length allows users to tackle a variety of cutting tasks, from small branches to larger logs, making it a multifaceted tool for homeowners and landscapers alike. The low kickback chain design enhances safety, as it reduces the risk of the chainsaw jumping back towards the user during operation.

In terms of user comfort, the Poulan 190781 comes equipped with an ergonomic handle that reduces fatigue during extended use. The anti-vibration system integrated into the design ensures a smoother experience, making it easier to handle for long periods without discomfort. Additionally, the tool comes with a simple and hassle-free starting system, which is particularly beneficial for those who may not be as technically inclined.

For maintenance and safety, the Poulan 190781 is designed with an easy-access air filter and chain tension adjustment, allowing users to keep the chainsaw in optimal condition with minimal effort. The chain brake feature provides added safety by allowing users to quickly stop the chain in the event of kickback.

Overall, the Poulan 190781 embodies a blend of power, efficiency, and comfort, making it an excellent choice for anyone looking to invest in a reliable chainsaw for their outdoor needs. Whether you're a seasoned professional or a beginner, this chainsaw offers the performance and features to meet your demands effectively.
Top Page Image Contents