ASSEMBLY

HOW TO SET UP YOUR TRACTOR

INSTALL SEAT (See Fig. 2)

Adjust seat before tightening adjustment bolt.

•Remove adjustment bolt, lock washer and flat washer securing seat to cardboard packing and set aside for assembly of seat to tractor.

•Pivot seat upward and remove from the cardboard pack- ing. Remove the cardboard packing and discard.

•Place seat on seat pan so head of shoulder bolt is positioned over large slotted hole in pan.

•Push down on seat to engage shoulder bolt in slot and pull seat towards rear of tractor.

•Pivot seat and pan forward and assemble adjust- ment bolt, lockwasher and flat washer loosely. Do not tighten

•Lower seat into operating position and sit on seat.

•Slide seat until a comfortable position is reached which allows you to press clutch/brake pedal all the way down.

•Get off seat without moving its adjusted position.

•Raise seat and tighten adjustment bolt securely.

SEAT

SEAT PAN

SHOULDER

BOLT

FLAT WASHER

LOCK WASHER

ADJUSTMENT

BOLT

FIG. 2

CHECK BATTERY (See Fig. 3)

•Lift seat pan to raised position.

•If this battery is put into service after month and year indicated on label (label located between terminals) charge battery for minimum of one hour at 6-10 amps. (See "BATTERY" in MAINTENANCE section of this manual for charging instructions).

SEAT PAN

LABEL

TERMINAL

TERMINAL

FIG. 3

NOTE: You may now roll or drive your tractor off the skid. Follow the appropriate instruction below to remove the tractor from the skid.

TO ROLL TRACTOR OFF SKID (See Op- eration section for location and function of controls)

•Press lift lever plunger and raise attachment lift lever to its highest position.

•Release parking brake by depressing clutch/brake pedal.

•Place gearshift lever in neutral (N) position.

•Roll tractor forward off skid.

•Remove banding holding deflector shield up against tractor.

TO DRIVE TRACTOR OFF SKID (See Op- eration section for location and function of controls)

WARNING: Before starting, read, understand and follow all instructions in the Operation section of this manual. Be sure tractor is in a well-ventilated area. Be sure the area in front of tractor is clear of other people and objects.

•Be sure all the above assembly steps have been com- pleted.

•Check engine oil level and fill fuel tank with gasoline.

•Sit on seat in operating position, depress clutch/brake pedal and set the parking brake.

•Place gear shift lever in neutral (N) position.

•Press lift lever plunger and raise attachment lift lever to its highest position.

•Start the engine.After engine has started, move throttle control to idle position.

•Depress clutch/brake pedal into full “BRAKE” position and hold. Move gearshift lever to 1st gear.

•Slowly release clutch/brake pedal and slowly drive tractor off skid.

•Apply brake to stop tractor, set parking brake and place gearshift lever in neutral position.

•Turn ignition key to “OFF” position.

Continue with the instructions that follow.

7

Page 6 Page 8
Page 7
Image 7
Poulan 190781 manual HOW to SET UP Your Tractor, Install Seat See Fig, Check Battery See Fig
Page 6 Page 8

190781 specifications

The Poulan 190781 is a versatile and powerful tool designed for both professional and home use, specifically catering to the needs of outdoor landscape maintenance and tree care. This chainsaw is engineered to deliver exceptional performance, ensuring that tasks like pruning, trimming, and cutting firewood are handled with ease and efficiency.

One of the standout features of the Poulan 190781 is its robust engine. Powered by a reliable 42cc engine, this chainsaw provides ample power for cutting through tough wood while maintaining efficient fuel consumption. The engine is engineered with advanced technologies that minimize emissions and reduce fuel consumption, making it an environmentally friendly choice for users who are conscious of their ecological footprint.

The chainsaw also features an 18-inch bar and chain, which strikes a perfect balance between maneuverability and cutting capacity. This length allows users to tackle a variety of cutting tasks, from small branches to larger logs, making it a multifaceted tool for homeowners and landscapers alike. The low kickback chain design enhances safety, as it reduces the risk of the chainsaw jumping back towards the user during operation.

In terms of user comfort, the Poulan 190781 comes equipped with an ergonomic handle that reduces fatigue during extended use. The anti-vibration system integrated into the design ensures a smoother experience, making it easier to handle for long periods without discomfort. Additionally, the tool comes with a simple and hassle-free starting system, which is particularly beneficial for those who may not be as technically inclined.

For maintenance and safety, the Poulan 190781 is designed with an easy-access air filter and chain tension adjustment, allowing users to keep the chainsaw in optimal condition with minimal effort. The chain brake feature provides added safety by allowing users to quickly stop the chain in the event of kickback.

Overall, the Poulan 190781 embodies a blend of power, efficiency, and comfort, making it an excellent choice for anyone looking to invest in a reliable chainsaw for their outdoor needs. Whether you're a seasoned professional or a beginner, this chainsaw offers the performance and features to meet your demands effectively.
Top Page Image Contents