ASSEMBLY

CAUTION: Do not operate this mower without the discharge guard or an entire approved grass catcher in place. These guards are for your protection and are re- quired by the American National Standards Institute and Consumer Products Safety Commission.

CAUTION: Disconnect spark plug wire from spark plug and place wire where it cannot come in contact with plug.

ASSEMBLE LOWER HANDLE

(USE HARDWARE GROUP “A”)

MODELS WITH BOLT-ON LOWER HANDLE:

•For ease of lower handle assembly, raise rear of deck and block securely.

•Position lower handle on deck as shown:

-(20" mowers) cut-off flat forward.

-(22" mowers) arrow down.

•Align holes in handle with holes in deck as shown and assemble 3/8-16 x 3/4 hex bolts, 7/8" washers and flanged locknuts. Tighten securely.

•Repeat for opposite side of mower.

Lower

7/8" Washers

Flanged locknuts

handle

Arrow

 

 

 

 

down

 

 

(22"

 

 

Mowers)

 

 

Cut-off flat forward

Hex bolts

(20" Mowers)

MODELS WITH DECK HANDLE BRACKETS:

SQUEEZE

TO INSTALL

Lower handle

 

Handle bracket

Hairpin cotter

mounting pin

(REAR DISCHARGE MOWER SHOWN)

ASSEMBLE UPPER HANDLE

(USE HARDWARE GROUP “B”)

MODELS WITH NON-FOLDING HANDLES:

•Position upper handle over lower handle:

-(20" mowers) small hole for mounting upstop bracket to left hand side.

-(22" mowers) side of handle with four

(4) holes as shown to left hand side.

•Assemble 1/4-20 x 1-1/2 hex bolts and 1/4-20 locknuts. Tighten securely.

Four (4) holes (22" Mowers)

Upstop bracket

Hex bolts

 

Upstop bracket

Locknuts

screw #10-24 x 1/2

MODELS with FOLDING UPPER HANDLE:

•Position upper handle over lower handle with small hole for mounting upstop bracket to left hand side.

•Assemble handle bolts and wing nuts. Tighten securely.

•Install lower handle onto handle brackets by squeezing the bottom ends of handle towards each other until the handle

will slip onto the mounting pins on the handle brackets.

•Pull handle back to lock in operating position.

•Install the two (2) hairpin cotters sup-

plied onto the mounting pins.

9

 

Upstop bracket

Upstop bracket screw #10-24 x 1/2

Wing nuts

Handle bolts

Page 8 Page 10
Page 9
Image 9
Poulan 193747 manual Assembly, Assemble Lower Handle, Assemble Upper Handle, USE Hardware Group a, USE Hardware Group B
Page 8 Page 10

193747 specifications

The Poulan 193747 is a powerful and efficient chainsaw that is designed for both professional and residential use. Known for its durability and high performance, this chainsaw is a popular choice among homeowners and landscapers alike.

One of the main features of the Poulan 193747 is its robust engine, which delivers reliable power for various cutting tasks. The chainsaw is equipped with a high-performance 50cc two-stroke engine, providing an ideal balance between power and weight. This ensures that users can handle the chainsaw for extended periods without undue fatigue.

Another standout characteristic of the Poulan 193747 is its lightweight design. Weighing in at just around 10 pounds, this chainsaw is easy to maneuver, making it suitable for overhead cuts and reaching into tight spaces. The ergonomic handle provides a comfortable grip, reducing vibrations and enhancing control during operation.

The chainsaw features a 20-inch bar and chain, allowing for effective cutting of larger trees and limbs. With a chain speed of up to 15 meters per second, it enhances cutting efficiency, making tasks quicker and reducing overall fatigue. Additionally, the tool-less chain tensioning system allows users to adjust and maintain chain tension easily without the need for additional tools.

In terms of technology, the Poulan 193747 incorporates advanced air induction technology. This system helps to keep debris out of the air filter, resulting in improved engine performance and prolonged filter life. The easy-start system minimizes the effort required to start the chainsaw, ensuring a hassle-free experience even for those who are less experienced.

Safety is also a top priority in the design of the Poulan 193747. The chainsaw is equipped with a handguard and a chain brake that automatically engages during kickback situations. These features help protect the user from accidents and injuries, making it a reliable choice for both novice and experienced operators.

Overall, the Poulan 193747 combines power, portability, and safety features in a versatile chainsaw that can handle various cutting tasks. Whether you're pruning trees, cutting firewood, or clearing debris, the Poulan 193747 proves to be an excellent tool, blending performance with user-friendly design for effective outdoor work.
Top Page Image Contents