To Remove Wheels See Fig | Poulan 199434 instruction

SERVICE AND ADJUSTMENTS

WARNING: Belt replacement requires separation of the snow thrower. While separating the auger housing from the frame assembly, it is important that an assistant stand in the operating position and hold the snow thrower handles. Se- rious personal injury and/or damage to the unit could occur if the snow thrower should fall during the belt changing process.

FRAME	AUGER
ASSEMBLY	HOUSING

HANDLES

1.REMOVE GASOLINE FROM FUEL TANK - Drain gaso- line from fuel tank into a suitable container, outdoors, away from ﬁre or ﬂame. Wipe up any spilled gasoline.

2.REMOVE DISCHARGE CHUTE - Loosen locknut securing chute rotator head to mounting bracket only enough to allow chute rotator head to be raised and discharge chute to be removed from snow thrower.

3.REMOVE BELT COVER - See “TO REMOVE BELT COVER” in this section of this manual.

4.REMOVE ENGINE PULLEY - Remove bolt, lockwasher and ﬂat washer securing pulley to engine crankshaft. Remove outside (auger) pulley only from crankshaft.

5.SEPARATE SNOW THROWER - With your assistant standing in the operating position holding the handles, remove the two (2) bolts and lock washers holding auger housing and frame together.

WARNING: As the last bolt is removed, have your assistant carefully lower the handles down to the ground.

6.REMOVE AUGER BELT from around pulley.

7.RELIEVETENSIONONTRACTIONDRIVEBELTIDLER and remove traction drive belt from around pulleys.

HINT: Insert a 3/8" drive ratchet (in the “ON” position) into the square hole in idler arm and rotate ratchet clockwise to relieve tension.

8.With tension relieved on idler, install new traction drive belt around pulleys and inside belt keepers.

9.Place auger belt around and inside the groove of auger pulley only.

10.While your assistant slowly raises handles to rejoin the auger housing and frame assembly, pull up on the auger belt and squeeze sides together above pulley so belt is fully seated in groove of pulley.

11.Bring snow thrower completely together and check carefully for proper routing of belts. If auger belt has become dislodged from the pulley (by catching the idler arm bracket while bringing snow thrower together), separate the snow thrower and repeat step 10. Belt must be fully seated in pulley groove when bringing

the snow thrower together.

12.Install the two (2) hex bolts and lock washers and tighten securely.

13.INSTALL ENGINE PULLEY - Place belt in pulley groove and slide pulley on crankshaft. Install ﬂat washer, lock- washer and bolt and tighten securely (30-35 ft. lbs. torque). Make sure belt is inside belt keeper.

14.INSTALL BELT COVER and two (2) screws. Tighten securely.

15.INSTALL DISCHARGE CHUTE – See “INSTALL DIS- CHARGE CHUTE / CHUTE ROTATER HEAD” in the Assembly / Pre-Operation section of this manual.

	BELT KEEPER
	TRACTION DRIVE BELT
	ENGINE	FLAT WASHER
	PULLEY	FLAT WASHER
	PULLEY
		LOCKWASHER
		BOLT
IDLER ARM			AUGER
SQUARE			BELT
HOLE
CLUTCHING
IDLER ARM
BRACKET
	AUGER PULLEY
		BOLT	LOCK
			WASHER
FRAME	AUGER
FRAME	HOUSING

FIG. 21

TO REMOVE WHEELS (See Fig. 22)

•Remove the klik pin and remove wheel from axle.

IMPORTANT: When installing wheel, be sure to use the in- nermost hole in axle and the wheel hub hole. To disengage drive system from the wheels (for pushing or transporting the snow thrower), remove klik pin from wheel hub and insert pin into the outermost hole in axle only.

KLIK PIN	OUTER HOLE
	INNER
	HOLE
WHEEL	WHEEL HUB

FIG. 22

199434 specifications

The Poulan 199434 is a robust and reliable chainsaw that caters to both professionals and home users alike. Known for its versatility, this model is especially popular among those who require an effective tool for yard maintenance, pruning, and even felling small to medium-sized trees. Its power-packed features and user-friendly design make it a standout option in the chainsaw market.

At the heart of the Poulan 199434 is a strong and efficient 42cc engine, which delivers a commendable power-to-weight ratio. This allows for quick and efficient cutting operations, whether you're trimming branches or tackling larger logs. The engine utilizes a two-cycle design, which not only enhances performance but also ensures lower emissions, making it more environmentally friendly.

One of the remarkable features of the Poulan 199434 is its easy-to-access air filter. This vital component helps maintain optimal engine performance by allowing users to conveniently clean or replace the filter. Additionally, the chainsaw comes equipped with an automatic chain oiler that delivers lubrication as needed, reducing friction and extending the life of both the chain and the bar.

The chainsaw's 18-inch bar is a perfect size for handling various cutting tasks, providing excellent reach without sacrificing control. The chain itself is designed for durability and efficiency, ensuring smooth cutting with minimal kickback. Users will also appreciate the chainsaw's lightweight build, which reduces fatigue during extended use, making it easier to handle for both novice and experienced operators.

Safety features are another priority for the Poulan 199434. The chainsaw includes a hand guard that provides protection against flying debris, as well as a chain brake that can stop the chain quickly in case of kickback. These safety mechanisms instill confidence in users, allowing them to operate the chainsaw with peace of mind.

In summary, the Poulan 199434 is a feature-rich chainsaw that balances power, efficiency, and safety. Its high-performing engine, user-friendly maintenance features, and emphasis on safety make it a practical choice for a variety of woodworking tasks. Whether you're a homeowner needing to manage your landscaping or a professional tackling routine jobs, the Poulan 199434 is an exceptional tool designed to meet your needs.

Poulan 199434 owner manual To Remove Wheels See Fig

Models: 199434

SERVICE AND ADJUSTMENTS

TO REMOVE WHEELS (See Fig. 22)

199434 specifications