Cutters

Depth Gauge

Checking the tension:

 

 

 

 

 

 

 

 

 

 

 

 

Use the screwdriver end of the chain adjust-

 

 

 

 

 

 

 

 

 

 

 

 

ment tool (bar tool) to move the chain around

 

 

 

 

 

 

 

 

 

 

 

 

the bar. If the chain does not rotate, it is too

 

 

 

 

 

 

 

 

 

 

 

 

tight. If too loose, the chain will sag below the

 

 

 

 

 

 

 

 

 

 

 

 

bar.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Drive Links

Place chain onto the sprocket

7.Place chain over and behind clutch, fitting the drive links in the clutch drum sprocket.

8.Fit bottom of drive links between the teeth in the sprocket in the nose of the guide bar.

9.Fit chain drive links into bar groove.

10.Pull guide bar forward until chain is snug in guide bar groove. Ensure all drive links are in the bar groove.

NOTE: CHAIN BRAKE MUST BE DISENGAGED BEFORE INSTALLA- TION ON THE SAW. TO DISENGAGE CHAIN BRAKE, PULL THE FRONT HAND GUARD BACK TOWARD THE REAR OF THE CHAIN BRAKE AS FAR AS POSSIBLE (SEE ILLUSTRA- TION).

DISENGAGED

Front Hand Guard

ENGAGED

Chain Brake

11.Now, install chain brake making sure the adjusting pin is positioned in the lower hole in the guide bar. Remember this pin moves the bar forward and backward as the screw is turned.

12.Install chain brake nuts and finger tighten only. Once the chain is tensioned, you will need to tighten chain brake nuts.

CHAIN TENSION

(Including units with chain already installed) NOTE: When adjusting chain tension, make sure the chain brake nuts are finger tight only. Attempting to tension the chain when the chain brake nuts are tight can cause damage.

Chain Brake Nuts

Chain Adjustment

Tool (Bar Tool)

Adjusting the tension:

Chain tension is very important. Chain stretches during use. This is especially true during the first few times you use your saw. Always check chain tension each time you use and refuel your saw.

You can adjust the chain tension by loosen- ing the chain brake nuts and turning the ad- justing screw 1/4 of a turn while lifting up on the bar.

SIf chain is too tight, turn adjusting screw 1/4 turn counterclockwise.

SIf chain is too loose, turn adjusting screw 1/4 turn clockwise.

Adjusting

Screw

Chain Brake Nuts

Guide Bar

Adjusting Screw -- 1/4 Turn

SLift up the tip of the bar and securely tight- en the chain brake nuts with the bar tool.

SRecheck chain tension.

Chain Brake

Nuts

WARNING: If the saw is operated with a loose chain, the chain could jump off the guide bar and result in serious injury.

7

Page 6 Page 8
Page 7
Image 7
Poulan 1950, 2055 instruction manual Checking the tension, Chain Tension, Adjusting the tension
Page 6 Page 8

1950, 2055 specifications

The Poulan 1950 and 2055 chainsaws represent a blend of power and precision, designed to cater to both professional loggers and home users alike. These models have made a significant mark in the realm of outdoor power equipment, thanks to their robust features and cutting-edge technologies.

Starting with the Poulan 1950, this chainsaw is equipped with a 50cc engine, delivering plenty of power for a variety of cutting tasks. Its lightweight design allows for maneuverability and ease of use, making it a favorable option for detailed pruning as well as heavier cutting jobs. One of the standout features of the 1950 is its automatic oiling system, which ensures that the chain receives adequate lubrication during operation, extending the life of both the chain and the bar. This model also features a simple pull-start mechanism that enhances user convenience, allowing for quick starts even in cold weather conditions.

Moving on to the Poulan 2055, this chainsaw is slightly more powerful, boasting a 55cc engine that provides increased torque for more demanding tasks. Designed with advanced technologies, the 2055 not only improved performance but also user comfort. It is fitted with a vibration-dampening system, which minimizes vibrations transferred to the user’s hands, reducing fatigue and strain during extended use. Furthermore, the 2055 features an easy-to-access air filter and spark plug, simplifying maintenance and upkeep, which is essential for long-term performance.

In addition to their respective power sources, both models utilize a chain brake system designed to enhance safety. This feature automatically stops the chain rotation if the saw is accidentally dropped or if a kickback situation arises. The ergonomic handles and lightweight construction of both chainsaws make them suitable for a wide range of users, from novices to seasoned professionals.

In summary, the Poulan 1950 and 2055 chainsaws are powerful, efficient, and designed with the user in mind. They combine advanced engineering with practical features, ensuring that whether tackling small garden tasks or larger jobs, these chainsaws deliver consistent performance. With their reliability and ease of use, they have certainly carved out a reputable niche in the world of outdoor power equipment.
Top Page Image Contents