WARNING: Only use brushcutter at- tachments that provide a metal shield with proboscis nose.

Proboscis nose

SUse only specified blade and make sure it is properly installed and securely fastened.

SCut from your left to your right. Cutting on the right side of the shield will throw debris away from the operator.

S Always use the handlebar and a properly adjusted shoulder strap with blade (see AS- SEMBLY instructions in brushcutter attach- ment instruction manual).

CULTIVATOR SAFETY

WARNING: Rotating tines can cause serious injury. Keep away from rotating tines. Stop the engine and disconnect the spark plug before unclogging tines or making re- pairs.

terial when the blade is in motion. Make sure the switch is in the OFF position, the spark plug wire is disconnected, and the blade has stopped moving before removing jammed material from the cutting blade. Do not grab or hold the unit by the cutting blade.

Blades move Allow blades to stop

momentarily before removing

after the them from the cut. trigger is

released.

WARNING: Inspect the area before starting the unit. Remove all debris and hard objects such as rocks, glass, wire, etc. that can ricochet, be thrown, or otherwise cause injury or damage during operation.

S Do not use a cutting blade that is bent, warped, cracked, broken or damaged in any other way. Have worn or damaged parts replaced by your authorized service dealer.

S Always keep unit in front of your body. Keep all parts of your body away from the cutting blade.

SKeep the cutting blade and air vents clear of debris.

WARNING: Inspect the area to be cultivated before starting the unit. Remove all debris and hard and sharp objects such as rocks, vines, branch-- es, rope, string, etc.

SAvoid heavy contact with solid objects that might stop the tines. If heavy contact oc- curs, stop the engine and inspect the unit for damage.

SNever operate the cultivator without the tine

cover in place and properly secured.

SKeep the tines and guard clear of debris. S After striking a foreign object, stop the en-

gine, disconnect the spark plug and inspect the cultivator for damage. Repair before re- starting.

S Disconnect attachment from the drive en- gine before cleaning the tines with a hose and water to remove any build--up. Oil the tines to prevent rust.

S Always wear gloves when servicing or cleaning the tines. The tines become very sharp from use.

S Do not run unit at high speed unless culti- vating.

HEDGE TRIMMER SAFETY

DANGER: RISK OF CUT; KEEP HANDS AWAY FROM BLADE -- Blade moves momentarily after the trigger is re- leased. Do not attempt to clear away cut ma-

5

POLE PRUNER SAFETY

WARNING: Reciprocating blade can cause severe injury. Inspect the unit before use. Do not operate unit with a bent, cracked or dull blade. Keep away from the blade.

WARNING: The reciprocating blade is sharp. Do not touch. To prevent serious in- jury, always stop engine and ensure blades have stopped moving, disconnect spark plug, and wear gloves when changing or handling the blade.

WARNING: A coasting blade can cause injury while it continues to move after the engine is stopped. Maintain proper con- trol of the unit until the blade has completely stopped moving. Keep hands, face and feet at a distance from all moving parts. Do not at- tempt to touch or stop the blade when it is moving.

WARNING: Falling objects can cause severe head injury. Wear head protec- tion when operating this unit with a pole prun- er attachment.

Page 5
Image 5
Poulan 31WG instruction manual Cultivator Safety, Hedge Trimmer Safety Pole Pruner Safety, Proboscis nose