Symmetrical Guide Bar

Large Radius Tip

SLow-Kickback Chain, designed with a con- toured depth gauge and guard link which de- flect kickback force and allow wood to gradu- ally ride into the cutter. Low-Kickback Chain has met kickback performance require- ments when tested on a representative sam- ple of chain saws below 3.8 cubic inch displacement specified in ANSI B175.1.

Contoured Depth Gauge Elongated Guard Link

Deflects kickback force and allows

wood to gradually

Low--Kickbackride into cutter Chain

Can Obstruct

Material

Not a Low--Kickback Chain

S Front Handguard, designed to reduce the chance of your left hand contacting the chain if your hand slips off the front handlebar.

S Position of front and rear handlebars, de- signed with distance between handles and “in-line” with each other. The spread and “in- line” position of the hands provided by this design work together to give balance and re- sistance in controlling the pivot of the saw back toward the operator if kickback occurs.

CHAIN BRAKE

SChain Brake, designed to stop the chain in the event of kickback.

WARNING: WE DO NOT REP- RESENT AND YOU SHOULD NOT AS- SUME THAT THE CHAIN BRAKE WILL PROTECT YOU IN THE EVENT OF A KICKBACK. Kickback is a lightning fast ac- tion which throws the bar and rotating chain back and up toward the operator. Kickback can be caused by allowing contact of the bar tip in the danger zone with any hard object. Kickback can also be caused by pinching the

saw chain along the top of the guide bar. This action may push the guide bar rapidly back toward the operator. Either of these events may cause you to lose control of the saw which could result in serious injury or even death. DO NOT RELY UPON ANY OF THE DEVICES BUILT INTO YOUR SAW. YOU SHOULD USE THE SAW PROPERLY AND CAREFULLY TO AVOID KICKBACK. Re- duced--kickback guide bars and low--kick- back saw chains reduce the chance and magnitude of kickback and are recom- mended. Your saw has a low kickback chain and bar as original equipment. Repairs on a chain brake should be made by an autho- rized servicing dealer. Take your unit to the place of purchase if purchased from a ser- vicing dealer, or to the nearest authorized master service dealer.

S Tip contact in some cases may cause a lightning fast reverse REACTION, kicking guide bar up and back toward operator.

SPinching the saw chain along the top of the

guide bar may push the guide bar rapidly back toward the operator.

SEither of these reactions may cause you to lose control of the saw which could result in serious injury. Do not rely exclusively upon safety devices built into your saw.

WARNING: Computed kickback angle (CKA) listed on your saw and listed in the CKA table below represents angle of kickback your bar and chain combinations will have when tested in accordance with CSA and ANSI standards. When purchasing replacement bar and chain, considerations should be given to the lower CKA values. Lower CKA values represent safer angles to the user, higher values indicate more angle and higher kick energies. Computed angles represented in the non-activated column in- dicate total energy and angle associated without activation of the chain brake during kickback. Activated angle represents chain stopping time relative to activation angle of chain brake and resulting kick angle of saw. In all cases lower CKA values represent a safer operating environment for the user. The following guide bar and chain combina- tions meet kickback requirements of CSA Z62.1, Z62.3, & ANSI B175.1 when used on saws listed in this manual. Use of bar and chain combinations other than those listed is not recommended and may not meet the CKA requirements per standard.

Computed kickback angle (CKA) Table

 

MODEL

BAR

 

CHAIN P/N

CKA without

 

P/N

 

Length

chain brake

 

 

 

 

 

330

952044701

 

20!

952051266

21_

 

 

380

952044701

 

20!

952051266

21_

 

 

330

530044833

 

22!

952051459

23_

 

NOTE: If this saw is to be used for commer- cial logging, a chain brake is required and shall not be removed or otherwise disabled to com-

ply with Federal OSHA Regulations for Com- mercial Logging.

5

Page 4 Page 6
Page 5
Image 5
Poulan 330, 380 Chain Brake, Computed kickback angle CKA Table, Symmetrical Guide Bar Large Radius Tip, CKA without
Page 4 Page 6

330, 380 specifications

The Poulan 330 and 380 chainsaws are renowned for their robust performance, reliability, and user-friendly design, making them popular choices among both novice and experienced users. These models are particularly favored for their applications in light to moderate cutting tasks, such as pruning, trimming, and felling smaller trees.

One of the standout features of the Poulan 330 and 380 chainsaws is their powerful two-stroke engine. The 330 model comes equipped with a 33cc engine, while the 380 variant boasts a more vigorous 38cc engine, providing ample power for various cutting applications. Both models strike a balance between portability and performance, allowing users to tackle jobs without feeling fatigued.

The design of the Poulan 330 and 380 is crafted with user comfort in mind. The lightweight construction enhances maneuverability, reducing strain even during prolonged operation. Additionally, both models feature ergonomic handles that offer a secure grip, contributing to precise control during usage. This focus on comfort, combined with a well-balanced design, makes these chainsaws easy to handle, particularly for beginners.

Another essential aspect of these chainsaws is the inclusion of advanced technology aimed at enhancing performance and durability. The Poulan 330 and 380 utilize an automatic oiling system, ensuring the bar and chain receive adequate lubrication during operation. This feature not only prolongs the life of the chainsaw but also aids in maintaining a smooth cutting action.

Safety is a priority in these chainsaws, as seen in the chain brake feature that halts chain movement in case of kickback, providing an extra layer of protection for the user. Furthermore, the inclusion of a spark arrestor ensures safe operation in various environments, minimizing the risk of fire hazards.

In terms of maintenance, both models are designed to be user-friendly. They feature an easily accessible air filter that makes cleaning and replacement a straightforward task, enhancing the chainsaw's longevity and consistent performance.

In conclusion, the Poulan 330 and 380 chainsaws encompass a blend of power, comfort, and safety, making them ideal options for homeowners and occasional users. With advanced features and a commitment to convenience, these chainsaws continue to uphold Poulan's reputation for quality and reliability in outdoor power equipment.
Top Page Image Contents