SAFETY NOTICE: Exposure to

vibrations through prolonged use of gasoline powered hand tools could cause blood vessel or nerve damage in the fingers, hands, and joints of people prone to circulation disorders or abnormal swellings. Prolonged use in cold weather has been linked to blood vessel damage in otherwise healthy people. If symptoms occur such as numbness, pain, loss of strength, change in skin color or texture, or loss of feeling in the fingers, hands, or joints, discontinue the use of this tool and seek medical attention. An anti-vibration system does not guarantee the avoidance of these problems. Users who operate power tools on a continual and regular basis must monitor closely their physical condition and the condition of this tool.

SPECIAL NOTICE: Your saw is equipped with a temperature limiting muffler and spark arresting screen which meets the requirements of California Codes 4442 and 4443. All U.S. forest land and the states of California, Idaho, Maine, Minnesota, New Jersey, Oregon, and Washington require many internal combustion engines to be equipped with a spark arresting screen by law. If you operate a chain saw in a state or locale where such regulations exist, you are legally responsible for maintaining the operating condition of these parts. Failure to do so is a violation of the law. Refer to the SERVICE section for maintenance of the spark arresting screen.

Failure to follow all Safety Rules and Precau- tions can result in serious injury. If situations occur which are not covered in this manual, use care and good judgement. If you need assistance, contact your authorized service dealer.

STANDARDS: This saw is listed by Un- derwriter’s Laboratories, Inc., in accordance with:

ANSI B175.1-2000American National Standard for Powered Tools -- Gasoline Powered Chain Saw -- Safety Requirements

CSA Z62.1-1995Chain Saws -- Occupa- tional Health and Safety

CSA Z62.3-1996Chain Saw Kickback Oc- cupational Health and Safety

Protective gloves (not provided) should be worn during assembly.

ATTACHING THE BAR & CHAIN (If not

already attached)

WARNING: If received assembled, repeat all steps to ensure your saw is proper- ly assembled and all fasteners are secure. Always wear gloves when handling the chain. The chain is sharp and can cut you even when it is not moving!

6

SLoosen and remove the chain brake nuts and the chain brake from the saw.

S Remove the plastic shipping spacer (if present).

Shipping

Spacer

Assembly

 

Tool

Chain Brake

 

Chain Brake Nuts

SAn adjusting pin and screw is used to ad- just the tension of the chain. It is very im- portant when assembling the bar, that the pin located on the adjusting screw aligns into a hole in the bar. Turning the screw will move the adjustment pin up and down the screw. Locate this adjustment before you begin mounting the bar onto the saw. See illustration below.

Adjustment

Screw

S Turn the adjusting screw counterclock- wise to move the adjusting pin almost as far as it will go to the rear. This should allow the pin to be near the correct position. Fur- ther adjustment may be necessary as you mount the bar.

S Slide guide bar behind clutch drum until guide bar stops agaist clutch drum sprocket.

Mount the bar

SCarefully remove the chain from the pack- age. Hold chain with the drive links as shown.

Tip of

Bar

CUTTERS MUST FACE IN

DIIRECTION OF ROTATION

Page 5 Page 7
Page 6
Image 6
Poulan 330, 380 instruction manual Safety Notice Exposure to, Attaching the BAR & Chain If not
Page 5 Page 7

330, 380 specifications

The Poulan 330 and 380 chainsaws are renowned for their robust performance, reliability, and user-friendly design, making them popular choices among both novice and experienced users. These models are particularly favored for their applications in light to moderate cutting tasks, such as pruning, trimming, and felling smaller trees.

One of the standout features of the Poulan 330 and 380 chainsaws is their powerful two-stroke engine. The 330 model comes equipped with a 33cc engine, while the 380 variant boasts a more vigorous 38cc engine, providing ample power for various cutting applications. Both models strike a balance between portability and performance, allowing users to tackle jobs without feeling fatigued.

The design of the Poulan 330 and 380 is crafted with user comfort in mind. The lightweight construction enhances maneuverability, reducing strain even during prolonged operation. Additionally, both models feature ergonomic handles that offer a secure grip, contributing to precise control during usage. This focus on comfort, combined with a well-balanced design, makes these chainsaws easy to handle, particularly for beginners.

Another essential aspect of these chainsaws is the inclusion of advanced technology aimed at enhancing performance and durability. The Poulan 330 and 380 utilize an automatic oiling system, ensuring the bar and chain receive adequate lubrication during operation. This feature not only prolongs the life of the chainsaw but also aids in maintaining a smooth cutting action.

Safety is a priority in these chainsaws, as seen in the chain brake feature that halts chain movement in case of kickback, providing an extra layer of protection for the user. Furthermore, the inclusion of a spark arrestor ensures safe operation in various environments, minimizing the risk of fire hazards.

In terms of maintenance, both models are designed to be user-friendly. They feature an easily accessible air filter that makes cleaning and replacement a straightforward task, enhancing the chainsaw's longevity and consistent performance.

In conclusion, the Poulan 330 and 380 chainsaws encompass a blend of power, comfort, and safety, making them ideal options for homeowners and occasional users. With advanced features and a commitment to convenience, these chainsaws continue to uphold Poulan's reputation for quality and reliability in outdoor power equipment.
Top Page Image Contents