Engine, AIR Cleaner See Fig | Poulan 96082000500, 411044 instruction

MAINTENANCE

Disconnect spark plug wire before performing any maintenance (except carburetor adjustment) to prevent accidental starting of engine.

Prevent fires! Keep the engine free of grass, leaves, spilled oil, or fuel. Remove fuel from tank before tipping unit for maintenance. Clean muffler area of all grass, dirt, and debris.

Do not touch hot muffler or cylinder fins as contact may cause burns.

ENGINE

LUBRICATION

Use only high quality detergent oil rated with API service classification SG-SL. Select the oil’s SAE viscosity grade according to your expected temperature.

SAE VISCOSITY GRADES

							SAE 30
			5W-30

F	-20	0			30 32 40		60	80	100
C	-30	-20		-10	0	10	20	30	40

TEMPERATURE RANGE ANTICIPATED BEFORE NEXT OIL CHANGE

oil_visc_chart1_e

FIG. 11

NOTE: Although multi-viscosity oils (5W-30, 10W-30, etc.) improve starting in cold weather, these multi viscosity oils will result in increased oil consumption when used above 32°F (0°C). Check your engine oil level more frequently to avoid possible engine damage from running low on oil.

Change the oil after every 25 hours of operation or at least once a year if the tiller is not used for 25 hours in one year.

Check the crankcase oil level before starting the engine and after each five (5) hours of continuous use. Add SAE 30 motor oil or equivalent. Tighten oil filler plug securely each time you check the oil level.

TO CHANGE ENGINE OIL (See Figs. 11 and 12)

Determine temperature range expected before oil change. All oil must meet API service classification SG-SL.

•Be sure tiller is on level surface.

•Oil will drain more freely when warm.

•Catch oil in a suitable container.

•Remove drain plug.

•Tip tiller forward to drain oil.

•After oil has drained completely, replace oil drain plug and tighten securely.

•Remove oil filler plug. Be careful not to allow dirt to enter the engine.

•Refill engine with oil. See “CHECK ENGINE OIL LEVEL” in the Operation section of this manual.

	engine_
OIL	art_12
OIL
DRAIN
PLUG

OIL LEVEL

OIL FILLER

PLUG

AIR CLEANER (See Fig. 13)

Service air cleaner cartridge every twenty-five hours, more often if engine is used in very dusty conditions.

•Loosen air cleaner screws, one on each side of cover.

•Remove air cleaner cover.

•Carefully remove air cleaner cartridge. Be careful. Do not allow dirt or debris to fall into carburetor.

•Clean by tapping gently on a flat surface.

•If very dirty or damaged, replace cartridge.

•Clean and replace cover. Tighten screws securely.

CAUTION: Petroleum solvents, such as kerosene, are not to be used to clean cartridge. They may cause deterioration of the cartridge. Do not oil cartridge. Do not use pressurized air to clean or dry cartridge.

AIR CLEANER CARTRIDGE

COVER

AIR

CLEANER

SCREW

FIG. 13

COOLING SYSTEM (See Fig. 14)

Your engine is air cooled. For proper engine performance and long life keep your engine clean.

•Clean air screen frequently using a stiff-bristled- brush.

•Remove blower housing and clean as necessary.

•Keep cylinder fins free of dirt and chaff.

CYLINDER FINS

MUFFLER

BLOWER

HOUSING

AIR

SCREEN

engine_a rt_71

	FIG. 12	FIG. 14
	FIG. 12	11
		11

411044, 96082000500 specifications

Poulan 96082000500 and 411044 are two robust chainsaw models known for their reliability and performance. Poulan, a brand renowned for its outdoor power equipment, has designed these chainsaws with specific features that cater to both professional users and homeowners who need powerful and efficient tools for yard work or maintenance tasks.

The Poulan 96082000500 is equipped with a powerful 50cc two-stroke engine that offers impressive cutting power and efficiency. This engine provides a maximum speed that allows for quick cuts through wood, making it an excellent choice for felling trees, cutting firewood, or general yard work. The chainsaw features an easy-start system, which is essential for reducing the hassle of starting up the engine, especially for users who may not have extensive experience or strength.

One notable characteristic of the Poulan 96082000500 is its low-vibration technology. This feature minimizes the amount of vibration felt by the user, making it more comfortable to operate during extended periods. Additionally, it comes with a premium bar and chain that enhance cutting performance and longevity, ensuring the tool remains efficient over time.

On the other hand, the Poulan 411044 is designed for lighter tasks and is ideal for users who need a chainsaw for trimming and pruning. This model operates with a reliable 38cc engine that balances power with ease of use. The lightweight design is perfect for maneuverability, allowing users to navigate branches and shrubs effortlessly.

The 411044 also incorporates an automatic oiling system, which ensures that the chain remains lubricated during operation, reducing wear and extending the tool’s lifespan. This feature is particularly beneficial for those who may forget to manually oil the chain, providing a more forgiving user experience.

Both chainsaws feature safety mechanisms, including a chain brake that instantly stops the chain if kickback occurs, thus enhancing user safety. Easy-access filters and tool-less chain tensioning add to the convenience, allowing for quick maintenance and adjustments without the need for extra tools.

In summary, the Poulan 96082000500 and 411044 stand out in the market for their powerful engines, user-friendly features, and emphasis on safety. They cater to a diverse range of users, from seasoned professionals to beginners, providing reliability and performance in outdoor tasks.

Poulan 96082000500, 411044 manual Engine, AIR Cleaner See Fig, Cooling System See Fig

Models: 411044 96082000500