SAFETY RULES

Safe Operation Practices for Walk-Behind Powered Rotary Tillers

TRAINING

Read the Owner’s Manual carefully. Be thoroughly familiar with the controls and the proper use of the equipment. Know how to stop the unit and disengage the controls quickly.

Never allow children to operate the equipment. Never allow adults to operate the equipment without proper instruction.

Keep the area of operation clear of all persons, par- ticularly small children, and pets.

PREPARATION

Thoroughly inspect the area where the equipment is to be used and remove all foreign objects.

Disengage all clutches and shift into neutral before starting the engine (motor).

Do not operate the equipment without wearing ade- quate outer garments. Wear footwear that will improve footing on slippery surfaces.

Handle fuel with care; it is highly flammable.

Use an approved fuel container.

Never add fuel to a running engine or hot engine.

Fill fuel tank outdoors with extreme care. Never fill fuel tank indoors.

Replace gasoline cap securely and clean up spilled fuel before restarting.

Use extension cords and receptacles as specified by the manufacturer for all units with electric drive motors or electric starting motors.

Never attempt to make any adjustments while the engine (motor) is running (except where specifically recommended by manufacturer).

OPERATION

Do not put hands or feet near or under rotating parts.

Exercise extreme caution when operating on or cross- ing gravel drives, walks, or roads. Stay alert for hidden hazards or traffic. Do not carry passengers.

After striking a foreign object, stop the engine (motor), remove the wire from the spark plug, thoroughly inspect the tiller for any damage, and repair the damage before restarting and operating the tiller.

Exercise caution to avoid slipping or falling.

If the unit should start to vibrate abnormally, stop the engine (motor) and check immediately for the cause. Vibration is generally a warning of trouble.

Stop the engine (motor) when leaving the operating position.

Take all possible precautions when leaving the machine unattended. Disengage the tines, shift into neutral, and stop the engine.

Before cleaning, repairing, or inspecting, shut off the engine and make certain all moving parts have stopped. Disconnect the spark plug wire, and keep the wire away from the plug to prevent accidental starting. Disconnect the cord on electric motors.

Do not run the engine indoors; exhaust fumes are dangerous.

Never operate the tiller without proper guards, plates, or other safety protective devices in place.

Keep children and pets away.

Do not overload the machine capacity by attempting to till too deep at too fast a rate.

Never operate the machine at high speeds on slippery surfaces. Look behind and use care when backing.

Never allow bystanders near the unit.

Use only attachments and accessories approved by the manufacturer of the tiller.

Never operate the tiller without good visibility or light.

Be careful when tilling in hard ground. The tines may catch in the ground and propel the tiller forward. If this occurs, let go of the handlebars and do not restrain the machine.

MAINTENANCE AND STORAGE

Keep machine, attachments, and accessories in safe working condition.

Check shear pins, engine mounting bolts, and other bolts at frequent intervals for proper tightness to be sure the equipment is in safe working condition.

Never store the machine with fuel in the fuel tank inside a building where ignition sources are present, such as hot water and space heaters, clothes dryers, and the like. Allow the engine to cool before storing in any enclosure.

Always refer to the operator’s guide instructions for important details if the tiller is to be stored for an ex- tended period.

- IMPORTANT -

CAUTIONS, IMPORTANTS, AND NOTES ARE A MEANS OF ATTRACTING ATTENTION TO IMPORTANT OR CRITICAL INFORMATION IN THIS MANUAL.

IMPORTANT: USED TO ALERT YOU THAT THERE IS A POSSIBILITY OF DAMAGING THIS EQUIPMENT.

NOTE: Gives essential information that will aid you to better understand, incorporate, or execute a particular set of instructions.

Look for this symbol to point out im- portant safety precautions. It means CAUTION!!! BECOME ALERT!!! YOUR SAFETY IS INVOLVED.

CAUTION: Always disconnect spark plug wire and place wire where it can- not contact spark plug in order to pre- vent accidental starting when setting up, transporting, adjusting or making repairs.

WARNING

The engine exhaust from this product con- tains chemicals known to the State of Cali- fornia to cause cancer, birth defects, or other reproductive harm.

2

Page 2
Image 2
Poulan 411044, 96082000500 manual Safety Rules, Training, Preparation, Operation, Maintenance and Storage

411044, 96082000500 specifications

Poulan 96082000500 and 411044 are two robust chainsaw models known for their reliability and performance. Poulan, a brand renowned for its outdoor power equipment, has designed these chainsaws with specific features that cater to both professional users and homeowners who need powerful and efficient tools for yard work or maintenance tasks.

The Poulan 96082000500 is equipped with a powerful 50cc two-stroke engine that offers impressive cutting power and efficiency. This engine provides a maximum speed that allows for quick cuts through wood, making it an excellent choice for felling trees, cutting firewood, or general yard work. The chainsaw features an easy-start system, which is essential for reducing the hassle of starting up the engine, especially for users who may not have extensive experience or strength.

One notable characteristic of the Poulan 96082000500 is its low-vibration technology. This feature minimizes the amount of vibration felt by the user, making it more comfortable to operate during extended periods. Additionally, it comes with a premium bar and chain that enhance cutting performance and longevity, ensuring the tool remains efficient over time.

On the other hand, the Poulan 411044 is designed for lighter tasks and is ideal for users who need a chainsaw for trimming and pruning. This model operates with a reliable 38cc engine that balances power with ease of use. The lightweight design is perfect for maneuverability, allowing users to navigate branches and shrubs effortlessly.

The 411044 also incorporates an automatic oiling system, which ensures that the chain remains lubricated during operation, reducing wear and extending the tool’s lifespan. This feature is particularly beneficial for those who may forget to manually oil the chain, providing a more forgiving user experience.

Both chainsaws feature safety mechanisms, including a chain brake that instantly stops the chain if kickback occurs, thus enhancing user safety. Easy-access filters and tool-less chain tensioning add to the convenience, allowing for quick maintenance and adjustments without the need for extra tools.

In summary, the Poulan 96082000500 and 411044 stand out in the market for their powerful engines, user-friendly features, and emphasis on safety. They cater to a diverse range of users, from seasoned professionals to beginners, providing reliability and performance in outdoor tasks.