OPERATION

The operation of any snow thrower can result in foreign objects thrown into the eyes, which can result in severe eye damage. Always wear

safety glasses or eye shields while operating 00155 your snow thrower or performing any adjust- ments or repairs. We recommend standard safety glasses

or a wide vision safety mask worn over spectacles.

TO USE CHOKE CONTROL (See Fig. 11)

The choke control is located on the engine. Use the choke control whenever you are starting a cold engine. Do not use to start a warm engine.

To engage choke, turn knob clockwise. Slowly turn knob counterclockwise to disengage.

HOW TO USE YOUR SNOW THROWER

Know how to operate all controls before adding fuel or attempting to start the engine.

STOPPING

TRACTION DRIVE

Release traction drive control lever to stop the forward or reverse movement of the snow thrower.

AUGER

Release the auger control lever to stop throwing snow.

ENGINE

1.Move throttle control to “STOP” position.

2.Remove (do not turn) safety ignition key to prevent unauthorized use.

NOTE: Never use choke to stop engine.

TO USE FUEL SHUT-OFF VALVE (See Fig. 9)

The fuel shut-off valve is located beneath the fuel tank on the engine. Always operate the snow thrower with the fuel shut-off valve in the OPEN position.

OFF

OPEN

FIG. 9

TO USE THROTTLE CONTROL (See Fig. 10)

The throttle control is located on the engine. Always operate the snow thrower with the engine at full throttle. Full throttle offers the best snow thrower performance.

FAST

SLOW

FIG. 10

10

OFFFULL

FIG. 11

TO CONTROL SNOW DISCHARGE (See Fig. 14)

WARNING: Snow throwers have ex- posed rotating parts, which can cause severe injury from contact, or from ma- terial thrown from the discharge chute. Keep the area of operation clear of all persons, small children and pets at all times including startup.

WARNING: If the discharge chute or auger become clogged, shut-off engine and wait for all moving parts to stop. Use the clean-out tool, NOT YOUR HANDS, to unclog the chute and/or auger.

The DIRECTION in which snow is to be thrown is controlled by the discharge chute control lever.

To change the discharge chute position, press down- ward on discharge chute control lever and move lever left or right until chute is in desired position. Be sure lever springs back and locks into desired position.

The DISTANCE that snow is thrown is controlled by the position of the chute deflector. Set the deflector low to throw snow a short distance; set the deflector higher to throw snow farther.

Press downward on chute deflector control lever and move lever forward to lower the deflector and decrease the distance. Move lever back to raise the deflector and increase the distance. Be sure lever springs back and locks into desired position.

TO THROW SNOW (See Fig. 14)

The auger rotation is controlled by the auger control lever located on the right side handle.

Squeeze auger control lever to handle to engage the auger and throw snow.

Release the auger control lever to stop throwing snow.

Page 10
Image 10
Poulan 421104 owner manual HOW to USE Your Snow Thrower, Stopping

421104 specifications

The Poulan 421104 is a well-regarded chainsaw that has captured the attention of both casual users and professionals alike. Renowned for its reliability and robust performance, the Poulan 421104 is ideal for a myriad of tasks, including cutting firewood, clearing brush, and performing light to moderate tree trimming.

One of the main features of the Poulan 421104 is its powerful 42cc engine, which strikes a balance between efficiency and power. This engine is capable of delivering strong performance while remaining lightweight, making it user-friendly for extended periods. The chainsaw's gas-powered design allows for robust cutting power without the limitations that often come with electric saws, such as battery life.

The Poulan 421104 incorporates several technological advancements that enhance its usability. It features an easy-start system that reduces the effort needed to start the engine. This is particularly beneficial for users who may struggle with traditional pull-starts, ensuring a smoother experience right from the outset. The chainsaw is also equipped with an automatic oiling system, which continuously lubricates the chain during operation, ensuring minimal friction and efficient performance. This not only prolongs the life of the chain but also helps maintain optimal cutting efficiency.

Another notable characteristic is its reduced vibration technology. This feature minimizes vibrations transmitted to the user’s hands, ensuring greater comfort during use. This is particularly advantageous when working on more extensive jobs that require prolonged handling. The Poulan 421104 also features a 16-inch bar length that strikes a good balance between maneuverability and cutting capacity, allowing users to tackle a variety of cutting tasks with ease.

The chainsaw also boasts a chain brake feature, enhancing safety by allowing the user to stop the chain quickly in case of kickback or an emergency situation. The overall design of the Poulan 421104 prioritizes user safety, making it a suitable choice for both novices and seasoned users.

In summary, the Poulan 421104 is a versatile and reliable chainsaw, boasting a powerful engine, user-friendly features, advanced technologies, and enhanced safety mechanisms. It is designed for performance and durability, making it an excellent addition to any tool collection. Whether for professional landscaping or home maintenance, the Poulan 421104 proves to be a valuable asset for various cutting tasks.